USER’S GUIDE V: 537-01 IT302B 37” HD Sound Bar with Built-in Subwoofer For the most up-to-date version of this User’s Guide, go to www.iLiveElectronics.
Warnings and Precautions CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. AVERTISSEMENT: Pour réduire le risque d’incendie ou de choc électrique, ne pas exposer cet appareil sous la pluie et l’humidité. CAUTION: Use of any controls or adjustments or performance of procedures other than those herein specified may result in hazardous radiation exposure.
Important Safety Instructions 1. Read these Instructions. 2. Keep these Instructions. 3. Heed all Warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
IT302B Features • • • • • • • • • • Includes 37” length Built-in subwoofer FM Radio (PLL) Works with universal remotes 2.1 channel stereo sound Optical digital audio input RCA stereo audio inputs 3.
Introduction Subwoofer Output Optical Input FM Antenna POWER SOURCE VOLUME Learn Press to begin using the learn function. Line Input 5 Stereo RCA Audio Inputs Power Press to turn the unit on or off. Source Press to switch between Optical, Line In, AUX and FM Radio modes. Volume Press to adjust the volume up or down.
Power Press to turn the unit on or off. Line Press to switch to Line In mode. Optical Press to switch to Optical mode. Scan Press to scan for available radio stations in FM Radio mode. Music Press to switch to the EQ optimized for music. Treble Press to adjust the treble up or down. Aux Press to switch to aux mode. Mute Press to mute the volume. FM Press to switch to FM Radio mode. Channel +/Press to adjust the channel up or down. Voice Press to switch to the EQ optimized for dialogue.
Audio Inputs, Radio & Sub Out Using the Stereo RCA Inputs When connecting two products using an RCA Cable, match the colored ports with the same colored connection. 1. Plug one end of a 3.5 mm audio input cable into the Line In on the unit. 1. Connect the RCA Cable to the RCA Stereo Inputs located on the back of the unit, and to the audio outputs on the television. 2. Plug the other end of the cable into the audio output/headphone output on an MP3 Player or other audio source. 2.
Learn Feature Understanding the Learn feature What is the Learn feature? The Learn feature captures remote commands from your television remote, and teaches your bar speaker to operate when these commands are pressed. Power, volume and mute are a few examples of commands that the bar speaker can learn. Why use the Learn feature? Teaching the bar speaker remote commands will reduce the number of remotes needed, save time searching for remote codes, and improve the ease of operation.