User`s guide

7
Audio Inputs, Radio & Sub Out
When connecting two products using an RCA
Cable, match the colored ports with the same
colored connection.
1. Connect the RCA Cable to the RCA Stereo Inputs
located on the back of the unit, and to the audio
outputs on the television.
2. Press the Power button to power on the unit.
3. Press the Source button repeatedly to enter AUX
Mode, indicated by an white light.
4. Audio played through the television will now be
heard through the speakers.
Using the Stereo RCA Inputs
1. Use an RCA cable (included) to connect an
external subwoofer to the Subwoofer Output.
2. When audio is played through any source, the
bar speaker will automatically use the connected
subwoofer.
Using the Subwoofer Output
You will need: An audio source with an Optical
Audio Output and a Digital Optical Audio Cable
(not included)
1. Connect the Digital Optical Audio Cable to the
optical output on the audio source and to the
Optical Input on the speaker bar.
2. Press the Power button to power the unit on.
3. Press the Source button repeatedly to switch to
SPDIF Mode, indicated by a amber light.
4. Using the native controls on your connected
device, make sure the audio settings are set to
PCM or Optical Audio and are turned On.
5. Audio from the connected audio source will now
be played through the speakers.
Using the Optical Input
1. Plug one end of a 3.5 mm audio input cable into
the Line In on the unit.
3.5 mm audio input cable not included.
2. Plug the other end of the cable into the audio
output/headphone output on an MP3 Player or
other audio source.
3. Press the Power button to power the unit on.
4. Press the Source button repeatedly to enter LINE
IN Mode, indicated by a blue light.
5. Audio played through the connected device will
now be heard through the speakers.
Using the Line In
1. Press the Source button repeatedly to enter FM
Radio Mode, indicated by a green light.
2. Press the Scan button on the remote.
3. The bar speaker will scan for all available
stations, and store them.
4. Press the Channel +/- buttons to browse
through stored stations.
Tuning the Radio