User`s guide
10
Bluetooth
Playing Audio WirelesslyPairing a Bluetooth Device for the First Time
1. Follow the instructions for Pairing a Bluetooth
Device.
2. Press the BT button on the remote to switch to
Bluetooth Mode.
3. Use the native controls on the connected
Bluetooth Device to select a track.
4. To play, pause or skip the selected track, use
the native controls on the connected Bluetooth
Device.
5. Audio played through the connected Bluetooth
device will now be heard through the speakers.
1. Power on the unit by pressing the Power button.
2. Press the Source button repeatedly to enter
Bluetooth mode, indicated by a blue light.
3. Press the Pairing button on the side of the unit.
The Pairing Indicator will ash blue quickly.
When pairing, remain within 3 feet of the unit.
4. Using the native controls on your Bluetooth
device, select the “ITB382” in your Bluetooth
settings to pair.
If your device requests a password, enter the default
password “ 0 0 0 0 ”.
Refer to the user’s manual for your specic device
for instructions on pairing and connecting
Bluetooth devices.
5. When successfully paired and connected, a
beep will issue from the unit and the Pairing
Indicator will display a solid blue light.
After initial pairing, the unit will stay paired unless
unpaired manually by the user or erased due to a
reset of the device.
If your device should become unpaired or you nd
it is unable to connect, repeat the above steps.
Note: Holding the Pair button for more than 3
seconds will erase all stored Bluetooth devices from
the sound bar’s memory. After the devices have
been erased, to re-pair with the unit you must also
forget the ITB382 on your Bluetooth device and then
follow the steps above.