Quick Start Guide
Customer Support: 1-888-999-4215
iLive | ITB296 v1507-01
Quickstart Guide
Plug the small end of the power cord into the DC Input on the back of the speaker,
and the large plug into a standard wall outlet.
Power
OPTICAL IN SUB OUT R LAUX INLINE IN
DC IN
2x
AAA
Indicator LightsRemote Batteries
STATUS INDICATOR
Power O Red Light
Optical Mode Amber Light
Aux In Mode White Light
Line In Mode Green Light
Bluetooth Pairing Flashing Blue Light
Bluetooth Connected Blue Light
Pairing a Bluetooth Device for the First Time
1. Power on the unit by pressing the Power button.
2. Press the button on the remote to switch to Bluetooth Mode, indicated by a
slowly ashing blue light.
You can also press the Source button on the side of the unit.
3. Press and hold the Pair button on the side of the unit.
The pairing indicator will ash blue quickly. When pairing, remain within 3 feet of the
unit.
4. Use the controls on your Bluetooth device to select ITB296 in your Bluetooth
settings to pair.
If your device requests a password, enter the default password 0 0 0 0 .
Refer to the user’s manual for your specic device for instructions on pairing and
connecting Bluetooth devices.
5. When successfully paired and connected, a beep will issue from the unit and the
Pairing Indicator will display a solid blue light.
After initial pairing, the unit will stay paired unless unpaired manually by the user or
erased due to a reset of the device. If your device should become unpaired or you nd
it is unable to connect, repeat the above steps.
Remote control: requires 2 AAA batteries (included).