User's Guide

Overview & ControlsFeatures
• Compatible with Apple and Google voice
assistants*
• Supports Bluetooth Wireless 5.0
• Wireless range: 49 feet
• Supports prole A2DP (Advanced Audio
Distribution Prole)
• Voice prompts announce earbud operations
• Digital volume control
• Micro-USB port for battery recharge
• DC battery power: built-in rechargeable lithium
ion battery
• Playtime: approximately 2 hours
Includes
• 3 sets of ear tips: small/medium/large
• Micro-USB to USB charging cable
Charging the Battery
Initial charge time is approximately 2 hours. Charge
fully before use. The low battery indicator will ash
for 1 minute and a voice will announce, “Low Battery,”
then the unit will automatically power OFF.
• Using a Micro-USB to USB cable (included),
connect to the USB port of a powered on
computer or USB power adaptor (not included)
to charge.
Power Status Indicator Light
Power ON Flashing Blue light
Low Battery Flashing Red light
Charging Solid Red light
Finished Charging Solid Blue light
Volume Down
Volume Up
LED Indicator inside
body of controller
Virtual Assistant
Button
Press to activate
Google/Siri.
Press again to deactivate.
Power + Pair
Press and hold until
ashing red/blue light.
Power ON/OFF
Press and hold for 5 sec.
Play / Pause /
Speakerphone
Press to play/pause audio
or answer/end a phone call.
Microphone
Google Assistant
Note: Use Google Assistant on Android devices.
Download
1. Download Google Assistant to your device by
searching for the Google Assistant app in the
Google Play™ Store, or Apple App Store
®
.
2. Connect to the earbuds using the Bluetooth
Connection steps.
3. After pairing, Google Assistant is ready to use.
Press the Virtual Assistant Button and say “Hey
Google,” or your custom phrase to begin. Use the
Google Assistant app on your smartphone or
tablet for more information and to adjust settings.
Bluetooth Connection
1. This unit features automatic device pairing and
is ready to pair as soon as it powers on. Power on
the earbuds by pressing and holding the Power
button, then a voice will announce, “Bluetooth is
connecting,” and the indicator light will alternate
between ashing red and blue. The earbuds are
ready to pair.
2. Open the Bluetooth Settings menu on your
smartphone or tablet and select IAEB09 from the
list. Refer to the user manual of your device for
more specic instructions on Bluetooth pairing.
3. When successfully connected, a voice will
announce, “Bluetooth connected,” and the
indicator light will turn solid blue. Use your
smartphone or tablet to select and play media.
Use the controls on your device or the earbuds to
play, pause, or skip audio, and adjust the volume.
4. After initial pairing, the earbuds will automatically
connect to the last device used. To pair to another
device, press and hold the Power/Pair button
on the earbuds and connect to it using the new
device.
Apple Siri
Note: Apple Siri with “Hey Siri” support is built into
Apple devices running iOS 12 or later, therefore no
app download is needed. Note: Apple Siri is not
available on Google or Android devices.
1. Connect to the earbuds using the Bluetooth
Connection steps. Press the Virtual Assistant
Button and say, “Hey Siri...” to begin.
*App download or software updates may be required.
Mobile carrier/data charges may apply. Specications,
software updates, and third party content are subject
to change without prior notice.
IAEB09-2315-01-IB - Lab.indd 6-10 5/21/2019 4:41:05 PM