Use and Care Manual

9
OPERATION INSTRUCTION
Please set the Thermostat to a desired condition before operating. Use
a screw driver to turn the arrow of the knob to the desire temperature
mark on the panel of the control box. To avoid the possibility of
overturning the fan, operate on a stable, level surface. Do not move fan
while it is in operation.
MAINTENANCE AND CLEANING
WARNING: Parts replacement and troubleshooting to be performed only
by qualified personnel.
WARNING: Do not depend on any switch as the sole means of
disconnecting power when installing or servicing the fan. Failure to do so
may result in fatal electrical shock.
WARNING: Turn off the wall switch before servicing or cleaning.
CAUTION: There is no user maintenance part except regular cleaning as
indicated below. All other servicing or maintenance should be
performed by qualified service personnel.
To clean the fan, use a soft damp cloth. Wipe down with a dry cloth.
Do not use cleaners that are harmful to paints or plastics.
CAUTION: Do not use gasoline, benzene, thinner, harsh cleaners, etc.,
which are dangerous and will damage the air circulator.
The propeller, guard, and motor should be cleaned periodically to
prevent overheating, and/or operating in an imbalanced condition.
CAUTION: Do not repair propeller if it becomes damaged. The propeller
is accurately balanced at the factory and should be replaced if damaged.
Do not bend the blades.
Motor is permanently lubricated.