Metal Gable Fan MODEL: ILG8G14-16TH 120VAC, 60Hz 3.
TABLE OF CONTENTS Important Instructions………………………………………. 3 Specifications……………………..………………………….. 5 Installing Instructions……………………….…………..… 6-7 Operating Instructions……………………….………....… 8 Maintenance and Cleaning………………………………. 8 Troubleshooting…………………………………………….
IMPORTANT INSTRUCTIONS CAUTION: Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Do not use the fan if any part is damaged or missing. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference. WARNING: To reduce the risk of electric shock, do not expose the fan to water or rain.
for suggested wiring diagrams and instructions. 8. The fan should be mounted behind louvers or in a location where the entrance of drawn in water is unlikely. 9. For general ventilating use only. Do not use to exhaust hazardous or explosive materials or vapors. 10. To avoid motor bearing damage and noisy and/or unbalanced impellers, keep drywall spray, construction dust, etc. off power unit. 11. Attach louvers or grilles when installing the fan. 12.
SPECIFICATION MODEL: ILG8G14-16TH 120VAC, 60Hz 3.
INSTALLATION INSTRUCTION WARNING: Turn off the wall switch prior to servicing unit. To avoid personal injury, wall switch must be turn off before servicing since the built-in thermal protection may turn on the circulator automatically. 1. A gable mount ventilator is intended to be mounted in a gable wall. If your existing gable vent is large enough, mount the fan directly behind it.
electric lines controlled by a master On/Off switch as shown in the wiring diagram.
OPERATION INSTRUCTION Please set the Thermostat and/or Humidistat to desired condition before operated, using screw driver to turn the arrow of the knob to the desire temperature/humidity mark on the panel of the control box. To avoid the possibility of overturning the fan, operate on a stable, level surface. Do not move fan while it is in operation. MAINTENCE AND CLEANING WARNING: Parts replacement and troubleshooting to be performed only by qualified personnel.
TROUBLE SHOOTING If your fan fails to operate, please follow these Instructions: 1. Make sure the fan is well connected and the electrical line-in is working properly. 2. Check for any obstruction. If you find an obstruction, turn the fan “OFF”. Disconnected the fan and carefully remove the obstruction. Reconnected the fan and turn it on again and see if it resumes normal. NOTE: IF YOU EXPERIENCE A PROBLEM WITH YOUR FAN, PLEASE DO NOT ATTEMPT TO OPEN OR REPAIR THE FAN YOURSELF.
