Use and Care Manual

8
OPERATION INSTRUCTION
Please set the Thermostat and/or Humidistat to desired condition
before operated, using screw driver to turn the arrow of the knob to
the desire temperature/humidity mark on the panel of the control box.
To avoid the possibility of overturning the fan, operate on a stable,
level surface. Do not move fan while it is in operation.
MAINTENCE AND CLEANING
WARNING: Parts replacement and troubleshooting to be performed only
by qualified personnel.
WARNING: Do not depend on any switch as the sole means of
disconnecting power when installing or servicing the fan. Failure to do so
may result in fatal electrical shock.
WARNING: Turn off the wall switch before servicing or cleaning.
CAUTION: There is no user maintenance part except regular cleaning as
following description. All other servicing or maintenance should be
performed by qualified service personnel.
To clean the fan, use a soft damp cloth. Wipe down with a dry cloth.
Do not use cleaners that are harmful to paints or plastics.
CAUTION: Do not use gasoline, benzene, thinner, harsh cleaners, etc.,
which are dangerous and will damage the air circulator.
The propeller, guard, and motor should be cleaned periodically to
prevent overheating, and/or operating in an imbalanced condition.
CAUTION: Do not repair propeller if it becomes damaged. The propeller
is accurately balanced at the factory and should be replaced if damaged.
Do not bend the blades.
Motor is permanently lubricated.