Instructions / Assembly

7
Installation
Instruction
1
Wires
Safety Cable
Downrod
Coupling Screw x 2
Bolt x 2
Clevis Pin x 2
Nut x 2
Washer x 2
Coupling
Motor Housing
Loosen Suspension Screw Sets
at top of Motor Assembly.
Route Safety Cable and Wires
through Downrod. Fix the
Downrod to the Coupling with
Bolt, Washer, Nut and tighten
them firmly then insert Clevis
Pin.
Clamp the Downrod with 2
Coupling Screw on Coupling to
prevent shaking during opera-
tion.
Lock Washer x 2
7
Mounting Bracket
Canopy
Canopy Cover
Canopy Screws
Loosen the 2 Canopy Screws on Mounting
Bracket.
Place Canopy on the Mounting Bracket.
Align the keyholes on Canopy with Mounting
Bracket and secure with the 2 screws.
Place the Canopy Cover on Canopy. Align
the keyholes and push in till sung.
Nut
Flat Washer
Rubber Washer
Blade
Blade Holder
Blade Screw
Place the Blade on top of Blade
Holder. Install Blade with the
Screws provided.
Important: Blade Screws must
be tighten till snug.
User must tighten Blade Screw
yearly.
Below shows a complete installation diagram.
8
9
8