Manualshelf

Instructions / Assembly

ManualsBrandsiLIVING ManualsAttic Fans16 in. 1200 CFM Power Variable Speed Exhaust Shutter Fan with Thermostat, Humidistat, Variable Speed, Timer
12345678
This Remote Control Kit contains the following:
• Control Box with Power Cord
• Power Cord (6 ft) for Hardwiring to the Fan
• Remote Control
• Remote Control Holder
• Screws
• Plastic Anchors
• Wire Connectors
Installation
1.
Turn power off at circuit breaker panel or fuse box.
2.
Connect the power cord of control kit to a 120V/60Hz wall socket.
3.
Then mount the control kit to the wall by two screws HORIZONTALLY.
Important: make sure the control kit is mounted horizontally with rain shield wall on top to
protect against rain. It may become hazardous to the consumer if water gets into the
control kit. Mounting the control kit horizontally allows the control kit to vent property.
4. Hardwire a power cord to the fan (included in the kit). Plug the power cord of fan into the
socket of control kit to get power.