Instructions / Assembly

5. When any solid state speed controller is used, a humming noise will be present in the fan
on low speed. This hum in no way affects the operation of the fan and is acceptable in
most commercial/industrial installations.
6. How to match the remote control with the receiving box:
During the pairing process, it is necessary to confirm that only one control box is powered
on and operates a remote controller.
The pairing steps are as follows:
(1) Press and hold the Power button and load two AAA batteries at the same time.
(2) Release the Power button and wait for the LCD to appear full (about 5~20 seconds).
(3) Press and hold the Power button to make the full screen disappear (about 2~3
seconds).
(4) Pairing process has been completed.