Instructions / Assembly

RH is part of the Auto Mode, it will execute Auto mode after the RH stop flashing and turn the
Fan ON and OFF when RH and temperature reach both settings. Press and hold RH button
for 3 seconds turns the RH Off directly. RH display will dim.
+/- button
Anytime you press + or - button, it will adjust the set temperature and go directly into auto
mode. When Set timer or RH mode, you can also use +/- button to adjust the set value.
Temp Button
This remote is capable of reading two location temperatures. One is the control box location,
which is the attic. The other is the room temperature, where the remote is located at.
If the remote only displays the set temperature, press the POWER button to wake up the
remote. Press TEMP button to switch the reading of the two location temperature. ATTIC
means the temperature at the location where the control box is mounted (make sure control
kit is plugged into a power source). ROOM means the room temperature at the location of
the remote control. Pressing and holding the TEMP button to switch from Celsius to
Fahrenheit.
iLIVING USA
239 Harbor Way
South San Francisco, CA 94080
Tel: [phone]
Email: [e-mail]
Like us on Facebook: https://www.facebook.com/ilivingusa/
Follow us on Twitter: @iLIVINGUSA
Check out our website: www.ilivingusa.com