Full Product Manual

10
1. Keep the area free of objects that could impede air flow on both the intake
and exhaust side of fan.
2. For proper exhaust operation, a window, door, or louver should be opened for
fresh air intake on the oppositeside of the area to be ventilated.
3. Connect power plug to any standard 115-volt AC outlet. Caution: Make sure
the SpeedControl is in the OFF position.
4. Use the pull chain switch to select the desired operating speed. The speed
runs as HIGH---MID---LOW--- OFF.
5. Press the Thermostat Switch on, select a thermostat setting. Ambient
temperature is regulated by adjusting the thermostat to a desired position.
To set, allow the unit to operate and cool down the room. When the desired
temperature is reached, turn the control knob just until the fan turns off.
This is your ideal setting. The fan will start automatically when the room
temperature raise above this set point, and will turn off when the set point is
reached.
Thermostat control panel
OPERATING INSTRUCTIONS
A
B
C
For ILG8SF16V-T/ ILG8SF18V-T/
ILG8SF20V-T/ ILG8SF24V-T/
ILG8SF30V-T
For ILG8SF10V-T/ ILG8SF12V-T/
ILG8SF14V-T
A. Thermostat Switch
B. Thermostat Knob
C. Pull Chain