Hybrid Solar and AC Powered Roof Exhaust Fan/Ventilator Running Day and Night SOLAR ONLY Model: ILG8SF301 SOLAR & AC Model: ILG8SF301A Owner’s Manual PLEASE READ AND SAVE THESE INSTRUCTIONS 1|Page
CONGRATULATIONS! The iLIVING ventilation exhaust fans are the NO.1 selling fan on Amazon. This smart solar attic fan is your best choice for cooling off your home. while helping you to save big on your cooling bills. Equipped with a powerful 20W adjustable Polycrystalline solar panel, this fan is IP68 waterproof. Built with a brushless motor, it provides up to 2000 sq ft of capacity cooling.
Dimensions: Coverage area (sq. ft) Product Width (in.) 2000 21 In the Box Content (ILG8SF301) Product Height (in.) Product Depth (in.
Installation and Mounting Instruction Before beginning the installation of your new Solar Powered Roof Exhaust Fan, please read through the entire installation instructions and contact us if you have any questions.
Fig. 1 Step 2 – Positioning the Solar Fan For optimum performance, position the solar fan due south or southwest, and position it on an area of roof where the sun is not shaded or blocked, so as to capture direct sunlight and extended sunlight periods throughout the day. (Fig. 2) Then pitch upon the position that is 18 – 24 inches from top of the roof peak and as close to the mid-point of your house as possible.
Step 3 – Marking the Ventilation Hole From inside the attic, measure approximately 18-24 inches down from the roof peak and center this spot between two rafters (Fig. 3-1). Through this mark, drill a screw into the plywood and roof shingle to have it located from on top of the roof. Cut a template cardboard at same size as the air duct’s, then puncture it from center hole over top of the screw, and trace a circle around outer edge of the template with any marker for a circle at 12’’ or 14” diameter. (Fig.
Fig. 4 Step 5 – Lifting the Shingles to Slide Up the Attic Fan To slip the solar fan smoothly on top of felt paper and underneath shingles on the roof, the nails located 5” above and to the side of that hole will need to be removed. Use a pry bar or reciprocating saw to loosen or cut those nails. (Fig. 5-1) In some cases, the builder may have used large washers to install the felt paper, if it does not slide easily into place when slipping the solar fan, a nail is most likely blocking the bottom.
shingles or the nail heads that have been added. Fig. 6 Step 7 (for those solar panel adjustable models only) – Installing the Angel Adjustment Bracket Attach the provided screws and brackets left from package box to the unit. Install the angle adjustment brackets by securing one end to the regulating plate and the other end to the solar panel frame. (Fig. 7) • This fan has the solar panel adjustment design at 3 angles, to set the angle properly to capture most direct sunlight in your area.
Step 8 (for those solar panel adjustable models only) – Adjusting the Solar Panel The fan’s solar panel should be adjusted to maximize exposure to the sun’s path during the day. The optimal adjustment is to have the panel 90° to the midday path of the sun. * You can re-adjust the panel during winter or summer seasons if desired.
How long is the warranty? This ventilator comes with a 15-YEAR LIMITED COMPONENT WARRANTY. If your unit does not appear to be working properly, please contact our service center by calling 1-800-317-1688. Prior to your call, we encourage you to visit our service related website www.ilivingusa.com for troubleshooting tips and service instructions if needed. Warranty Information Register your product at our website: Or visit iLivingUSA.
Feedback Love it? Help us make the product more for you. Let us know with a customer review. Please visit: https://www.amazon.com/review/review-your-purchases# At iLiving USA, we are committed to bringing top quality products to our customers. iLIVING USA 860 Mahler Road，Burlingame CA 94010 Tel: 1-800-317-1688 Email: service@ilivingusa.com Like us on Facebook: https://www.facebook.com/ilivingusa/ Follow us on Twitter: @iLIVINGUSA Check out our website: www.ilivingusa.
