Installation Guide

4OF4
INSTALLATION INSTRUCTIONS
STYLE NUMBER: UM-TST0038Q
STEP 4:
A. Remove the Socket Collar from the Socket on the
Socket Assembly. Place the Shade over the Socket as
shown. Use the Socket Collar Tool, thread the Socket
Collar onto the Socket to secure the Shade. Hand
tighten until snug.
Socket
Shade
Socket Collar
Socket Collar Tool
Bulb Shield
G9 Bulb
Socket
STEP 5
a. This fixture uses Clear G9 Halogen Bulbs. Maximum 60
watts (supplied).
b. Insert bulb and sit properly into place.
c. Screw Bulb Shield onto the Socket and hand tighten
until snug.
Do not touch the bulb with bare hands
use a cloth or glove.
IMPORTANT:
STEP 6:
a Adjust the Shade to your desired location by adjusting
the Swivel.
.
Swivel
CAUTION FOR BULB REPLACING
A. When replacing bulb, turn off power and allow lamp to cool. For safety purpose, wear gloves and eye protection.
B. If bulb is scratched or cracked, DO NOT use the lamp to avoid breakage during use or installation.
C. Use only in fixtures rated for lamps wattage and voltage.
D. Lamp operate under high pressure generating intense heat. Prevent contact with liquid and combustible
materials.
Your installation is completed now. Restore electricity.
Retain this sheet for future reference.