Installation Guide

ManualsBrandsIllumina Direct ManualsBathXyia 3-Light Polished Chrome Bath Vanity Light

ISSUED 05-2014

PACKAGE CONTENTS

1OF4

STYLE NUMBER: TST0590C

WARNING:

CAUTION:

● Before beginning the installation, turn off electricity at the circuit breaker box or the main fuse box by switching

off the circuit breaker or removing the fuse.

● These instructions are provided for your safety. It is very important that they are read completely before the

installation of your fixture. We strongly recommend that a professional electrician install the fixture.

● Disconnect fixture from the power source before replacing the bulb(s), making sure that bulb(s) had sufficient

time to cool down. DO NOT subject the lamp to any shock while lit as shattering of lamp may result.

● Do not touch the bulb with bare hands use a cloth or glove.

WARNINGS AND CAUTIONS

● Before beginning installation of product, make sure all parts are present. Compare parts with package contents

list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or operate the

product. Contact customer service for replacement part.

● Estimated Assembly Time: 20 - 30 minutes

● (3) Medium Base 100W Maximum, Alternate (3) CFL bulb.

● : Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape,

safety glasses.

● 1-866-535-1869

● customerservice@illuminadirect.com

● www.illuminadirect.com

Bulb Recommended:

Tools Required

Phone #:

E-mail:

website:

PREPARATION

www.illuminadirect.com

1-866-535-1869

UM-TST0590C

PART

DESCRIPTION

QUANTITY

Crossbar

(Pre-assembled to fixture body)

1pc

3pcs

2pcs

3pcs

Wire Connector

Outlet Box Screw

Mounting Screw

(Pre-assembled to fixture body)

Socket Collar

(Pre-assembled to fixture body)

Shade

Fixture Body

1pc

Green Ground Screw

()Pre-assembled to Crossbar

Summary of content (4 pages)

PAGE 1
www.illuminadirect.
PAGE 2
TST0590C FINISH: Polished Chrome 22” 1.5” 1 5” 6” 8” 5” Dia. Outlet Box Center 5.5” 6” 4” (3)100W medium base bulb (not Supplied) NO. PART NUMBER 1 G2577SH NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2" REPLACEMENT PART DESCRIPTION SHADE OPAL ETCHED 6"D REQ.
PAGE 3
INSTALLATION INSTRUCTIONS STYLE NUMBER: UM-TST0590C STEP 1: Note: Prior to installation, close or cover the sink drain and/or any vents near the installation site to prevent loss of mounting hardware if dropped. a . Remove the Crossbar from the Backplate on the Fixture Body as shown in STEP 3. b. Secure the Crossbar to the outlet box (not included) with Outlet Box Screws. Note: Fixture Body can be installed with the sockets facing either up or down.
PAGE 4
INSTALLATION INSTRUCTIONS STYLE NUMBER: UM-TST0590C STEP 4: a. Remove the Socket Collar from the Socket on the Fixture Body . Locate the Shade over the Socket as shown. Secure by threading the Socket Collar onto the Socket. Hand-tighten until snug. Socket Collar Shade Socket STEP 5: a. Install correct bulbs referring to fixture markings and/or labels for maximum wattage. Your installation is completed now. Restore electricity. Retain this sheet for future reference.