User Manual MTMR1650W User Manual Revision 1.0 © MeshTek Labs www.meshtek.
User Manual Introduction The MeshTek® MR16 is an RGBW SmartBulb. Turn On/off, Change color, mix colors, change brightness remotely through any Smart device using our iOS and Android app over Bluetooth Low Energy (BLE) protocol.
User Manual Block Diagram Installation Method The basic installation method is the same as that of a standard halogen MR16. Turn off the main power switch of the installation place prior to connection. Before installing the product, the lamp that was being used must be turned off. Replace it once it has sufficiently cooled. Check to see if the socket at the installation location is of the GU5.3 standard.
User Manual REGULATORY APPROVAL a. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
User Manual il doit accepter toutes interférences reçues, y compris celles susceptibles d’avoir des effets indésirables sur son fonctionnement. Conformément aux réglementations d’Innovation, Science and Economic Development Canada, cet émetteur radio ne peut fonctionner qu’à l’aide d’une antenne dont le type et le gain maximal (ou minimal) ont été approuvés pour cet émetteur par Innovation, Science and Economic Development Canada.
