Operation Manual

Portable DVD Player i1155_V12M12_IM_EN_05122008
www.i-Luv.com
- 24 -
SETUP INSTRUCTIONS
System Setup
1. Press the SETUP button in the Stop mode.
2. Use the NAVIGATION ( / ) buttons to
select the option (TV SYSTEM, SCREEN
SAVER, TV TYPE, DEFAULT) and press the
ENTER button.
3. Use the NAVIGATION ( / ) buttons to
adjust and press the ENTER button. The
screen will change to your suggested setting.
4. Repeat steps 2 and 3 above to choose another option.
5. To reset all the settings to factory default settings, select the option “DEFAULT”.
6. To exit the SETUP MENU and return to a normal screen, select EXIT SETUP and confirm
or press the SETUP button again.
Helpful Tips on Choosing the Aspect Ratio
1. About 4:3 PS
a. When wide-screen video is played, this mode crops the right and left sides off the
image in order that it can be viewed on a conventional screen.
b. Some wide-screen DVDs do not permit Pan Scan and playback is automatically in
letterbox mode (black bands on top and bottom).
2. About 4:3 LB
a. When wide-screen video is played in this mode on a conventional screen, black
bands appear at the top and bottom of the screen.
3. About 16:9
a. This is the correct mode for playing wide-screen videos on a wide screen.
4. The visible picture size is preset on the DVD. Therefore the playback picture of some
DVDs may not conform to the picture size you select.
5. When DVDs recorded in the 4:3 aspect ratio are played, the picture will always appear in
4:3 regardless of the TV shape setting.
Language Setup
1. Press the SETUP button in the Stop mode.
2. Use the NAVIGATION () button to
select LANGUAGE SETUP. Use the
NAVIGATION ( / ) buttons to select a
language and press the ENTER button.
Note: OSD default setting for various regions:
USA, United Kingdom, Applicable Asian
countries (English), Germany (German), Spain (Spanish), France (French), Italy (Italian).
3. Use the NAVIGATION ( / ) buttons to adjust and press the ENTER button. The screen
will change to your selected language immediately.
4. To exit the SETUP MENU and return to a normal screen, select EXIT SETUP and confirm
or press the SETUP button again.
SYSTEM SETUP
TV SYSTEM
SCREEN SAVER
TV TYPE
DEFAULT
EXIT SETUP
NTSC
PAL