BluePin 2 Instruction Manual i120 Please read this manual carefully before operating and save it for future reference. Have a question? Please visit http://www.i-Luv.
BluePin 2 V10M10_IM_EN_11262007 -1- www.i-Luv.
BluePin 2 V10M10_IM_EN_11262007 USER SAFETY GUIDE INSTRUCTIONS ON ENVIRONMENT PROTECTION Do not dispose of this product in the usual household garbage at the end of its life cycle; bring it to a collection point for the recycling of electrical and electronic appliances. This symbol on the product means the instructions for use or the packaging will inform about the methods of disposal. The materials are recyclable as mentioned in its marking.
BluePin 2 V10M10_IM_EN_11262007 USER SAFETY GUIDE Important Safety Instructions-Continued sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat. 7. Power sources – The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 8. Cleaning – The appliance should be cleaned with a dry cloth. 9.
BluePin 2 V10M10_IM_EN_11262007 USER SAFETY GUIDE FCC Notice (USA)-Continued communications, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
BluePin 2 V10M10_IM_EN_11262007 USER SAFETY GUIDE Additional Safety Instructions • • When not in use, keep your device in a safe place where it will not be bent or crushed. Keep this device away from children. This is a small item and may be swallowed by children and result in serious harm. About Electromagnetic Interference (EMI) This device is designed and manufactured not to exceed the exposure limit for radio frequency energy, which is set by the Federal Communications Commission of the U.
BluePin 2 V10M10_IM_EN_11262007 -6- www.i-Luv.
BluePin 2 V10M10_IM_EN_11262007 GETTING STARTED BluePin 2 Thank you for purchasing the i120 from iLuv. Please keep this manual in a safe place for future reference. • • • • • • • • • • Turns its host player into a Bluetooth system Answer or make a phone call wirelessly when Bluetooth mobile phone is paired. Pair BluePin 2 with Bluetooth-enabled music player and listen to your favorite music from your host system.
BluePin 2 V10M10_IM_EN_11262007 GETTING STARTED What is Bluetooth wireless technology? Bluetooth wireless technology is a short-range wireless communication technology intended to replace the cables connecting electronic devices while maintaining the high level of security. With Bluetooth wireless technology, two devices can be connected at the same time without the need to face each other or the concern of interference from other wireless communication within its optimum range of 300 feet.
BluePin 2 V10M10_IM_EN_11262007 GETTING STARTED LOCATION OF CONTROLS 1 2 3 4 5 6 1. 2. 3. 4. 5. 6. SEND (TX) Indicator light RCV (Receive/RX) Indicator light Built-in Microphone SEND/RCV Button PAIRING Button 10pin Connector -9- www.i-Luv.
BluePin 2 V10M10_IM_EN_11262007 OPERATING INSTRUCTIONS Operating the BluePin 2 The i120 has no independent power source (battery) and must be connected to an iLuv device in order to operate. Pairing in TX (Send) Mode 1. Connect the i120 to the 10pin connector on your iLuv audio device. 2. Press the SEND/RCV button on the side of the BluePin 2 until the SEND indicator light shows. 3.
BluePin 2 V10M10_IM_EN_11262007 OPERATING INSTRUCTIONS Pairing in RX (Receive) Mode 1. Connect the i120 to the 10pin connector on your iLuv audio device. 2. Press the SEND/RCV button on the side of the BluePin 2 until the RCV indicator light shows. 3. Follow the pairing instructions for the device with which you wish to pair the i120 (mobile phone, MP3 player, stereo headset, etc.). Note: Your connected device may ask for a PIN code. Enter, “0000” to continue pairing. 4.
BluePin 2 V10M10_IM_EN_11262007 TROUBLESHOOTING GUIDE 1. The i120 does not work with my mobile phone. Be certain that your mobile phone is equipped with Bluetooth wireless technology. This BluePin 2 will only work with such mobile phones. Additionally, your mobile phone must be paired with the i120 before all other pairing. 2. There is interference on the headset with my phone or music playing devices when paired with i120. The maximum distance for Bluetooth wireless communication is 300 feet (Class 1).
BluePin 2 V10M10_IM_EN_11262007 SPECIFICATIONS • • • • Bluetooth Core: Version 2.0 Bluetooth Profile: HFP, HSP, AVRCP, A2DP Communication Range: Up to 300ft (optimized), Class 1 Powered by the host system - 13 - www.i-Luv.
BluePin 2 V10M10_IM_EN_11262007 - 14 - www.i-Luv.
TEL: 516-626-7188 FAX: 516-626-7105 website: www.i-Luv.com iLuv is a trademark of jWIN Electronics Corp. Features and specifications are subject to change without prior notification. The Bluetooth word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by jWIN Electronics Corp. is under license. © 2007 jWIN Electronics Corp. All rights reserved.