Operation Manual

GETTING STARTED GETTING STARTED

Location of Controls on the Main Unit Location of Controls on the Main Unit-continued

This DVD player has built-in error compensation circuits to correct minor defects in a disc. There are limits,

however, to the amount of correction available. In some cases, the DVD player may skip some tracks, or parts

of tracks, on a disc during disc play. This problem may be caused by defects (such as scratches) on the disc

being played which are too large for the error compensation circuits to handle. If you encounter this problem,

try a new disc before having this unit serviced. If the DVD player operates normally, the skipping problem is

probably due to a defective disc.

Note: Only the above types of discs can be played on this unit. Some CD-R, CD-RW discs cannot be played

depending on the condition of the disc.

7. STOP BUTTON

8. iPod BUTTON

9. DVD BUTTON

10. DISC TRAY

11. REMOTE SENSOR

12. LED SCREEN

1. iPod DOCK

2. POWER BUTTON

3. OPEN / CLOSE BUTTON

4. PREV BUTTON

5. PLAY / PAUSE BUTTON

6. NEXT BUTTON

1. COMPOSITE VIDEO OUTPUT

2. S-VIDEO OUTPUT

3. 5.1-CH AUDIO OUTPUT

(FL, FR, SL, SR, CEN, SW)

4. COMPONENT VIDEO OUTPUT

(Y, Pb, Pr)

5. DIGITAL AUDIO COAXIAL OUTPUT

6. MAIN POWER SWITCH

DISC ERROR

3 | iLuv iLuv | 4

DVD OPEN

3 4 6

5 7

8 9

1211

2 5 63 41

i1277 | V10M10_IM_EN_01223008