Operation Manual

GETTING STARTED
7 | iLuv iLuv | 8
i1277 | V10M10_IM_EN_01223008
Setting up the Player
It is recommended that you keep the unit unplugged and disconnected from the wall outlet unit
while connecting the unit.
Connecting the Unit to a TV
• Composite Video (iPod and DVD) – Connect the video cable from the Video Out jack
on the back of the player to the Video In jack on your television set.
• S-Video (iPod and DVD) – For better video quality, connect the player to your television set
using an S-Video cable (not included). Connect the cable from the S-Video Out jack on the
back of the player to the S-Video In jack on the television set.
• Y, Pb, Pr (DVD only) – Use a Component cable (not included) to connect the unit to a
television set. Set the [Video] to Interlace YUV. If the television supports Progressive Scan,
set the [Video] to P-Scan Y, Pb, Pr
Connecting External Audio
The back panel of the iPod/DVD player provides:
COAXIAL Out: Connects to an external audio decoder.
Note on iPod connections:
• Video connection: Your iPod does not support component (Y, Pb, Pr) video output,
so always connect to composite video or S-Video for iPod play.
• Audio connection: Your iPod does not support 5.1 channel audio output and digital
audio output, so always connect to audio FR, FL channels for iPod play.
• The i1277 speaker system has a 2.0/5.1CH input selection
switch on rear panel.
• When playing 2.0 channel content, like your iPod, CD, MP3,
VCD and 2.0 channel DVD movies, set this switch to 2.0CH
position, otherwise the subwoofer will not sound.
• When play 5.1 channel DVD movies, set this switch to 5.1CH
position for surround audio effect.
• When set this switch on "2.0CH" position, the CEN, SL and SR
speaker no sound.
Before plugging the power cord into the AC outlet, check to make sure all of the connections have
been properly completed. When they have been, carefully plug power cord into outlet. Press the
POWER switch on the rear side to turn on the unit, the power indicator will light up. If unit is in standby
state, press the POWER button on the front panel to power the unit. The display panel will light.
When the unit is initially powered, a brief surge of electricity may cause interference with other
electronic equipment on the same circuit. If this occurs, connect the unit to an outlet on a different
circuit.
What’s Included
Connecting the Speakers
1. Main Unit
2. Remote Control (Battery Included)
3. AV Cable
4. iPod Dock Adapters
5. Instruction Manual
6. Warranty Card
7. QSG (Quick Start Guide)
GETTING STARTED
1. 2.
3. 4.
SLOW
iPod
MODE
PROG P/N DISPLAY
VIDEO
MODE
A-B REPEAT
MENU/BACK iPod/DVD
PAGE
DOWN
PAGE
UP
REV FWD PREV NEXT
PAUSE PLAY STOP
ENTER
ZOOM
SETUP
VOLUME
MUTE RETURN
STANDBY
SUBTITLE
TITLE
GOTO
ANGLE
LANGUAGE
OPEN/
CLOSE
1
7
10+ 0
8 9
2
4
3
5 6
DVD DVD & iPod iPod
i1277