Operation Manual

Bluetooth Transmitter V10M10_IM_EN_08032007
www.i-Luv.com
-8 -
OPERATING INSTRUCTIONS
Pairing the i151
In order to function properly, the i151 must be paired with a
Bluetooth headset or other device with Bluetooth wireless
technology. Follow the instructions below.
1. Set your Bluetooth device into its pairing mode following
the instructions in the instruction manual for the
connected device.
2. With the i151 switched OFF, press and hold the
Pairing/Power button for approximately five (5) seconds,
3. With the i151 switched ON, press and hold the
Pairing/Power button for approximately three (3) seconds
4. When the LED flashes Blue and Red alternatively, the
i151 is in Pairing mode.
5. The i151 will find the Bluetooth device and pair with it
automatically when placed near the device.
6. Once fully and properly paired, the LED will flash Blue at
three (3) second intervals.
Using the i151
Once the i151 is paired, the functions of your iPod can now be
sent wirelessly to the paired device.
When the device or headphone supports Bluetooth Remote
Control Profile (AVRCP), all control functions of your iPod can be
used wirelessly, including:
• Play
• Pause
• Stop (turn off iPod)
• Track Forward
• Track Backward