Operation Manual

iLuv
TM
Stereo Audio System for Your iPod V10M10_IM_EN_12072007
www.i-Luv.com - 12 -
1
2
3
4
5
6
7
8
9
10
GETTING STARTED
Location of Indications on the LCD Screen
Setting the Clock
1. When the unit is at connected to the AC outlet for the first time “12:00” will show on the display.While
the unit is at STANDBY mode, press and hold TIME/MEMORY button on the top panel or the remote
control for 2 sec. to enter Clock set mode. The display will flash “12H” indicating that the clock is set to
12 hour format.
2. Press TUNE/SKIP button on the top panel or remote control once to change the clock format to 24 hour
time. The display will change from “12H” to “24H”.
3. Press the TIME/MEMORY button to confirm. The hour digit will begin flashing. Press TUNE/SKIP button
on the top panel or remote control to set the hour. Press TIME/MEMORY button to confirm.
4. While hour is confirmed, minute digit will begin flashing. Press TUNE/SKIP button on the top panel or
remote control to set the minute. Press TIME/MEMORY button to confirm.
1. STEREO FUNCTION indication
2. PM indication (12 hour setting)
3. TIME/RADIO FREQUENCY display
4. AM/FM MODE display
5. ALARM FUNCTION indication
6. AUX MODE display
7. iPod MODE display
8. RADIO FREQUENCY UNITS display
9. SLEEP FUNCTION indication
10. WAKE UP MODE indication