Operation Manual

iLuv
TM
Stereo Audio System for Your iPod V10M10_IM_EN_12072007
www.i-Luv.com - 6 -
GETTING STARTED
Power Source
• This system is designed to operate on both 220V AC 50Hz and 110V AC 60Hz house current only.
• Connecting this system to any other power source may cause damage to the system and such damage is not covered by your warranty.
• Main plug is used as the disconnect device, the disconnect device shall remain readily operable.
The default voltage for the unit is 220V. Please make sure you have select the correct voltage before you plug the unit into any power source. The voltage
can be adjusted by the selector located at the back of the unit.
Do not switch the voltage when the unit is “ON” , “StandBy” or have plugged to any of the power source.
110
V
Safety Warning:
The default voltage is 220V.Make
sure you switch to the correct
voltage before plugging the AC plug
into any power source.
Do not switch voltage if the unit is
plugged into any power source, it
will damage the unit.
220V