Instruction manual

HD Radio Receiver with Dual Alarm Clock V10M10_IM_EN_03182008
www.i-Luv.com
- 11 -
OPERATIONAL INSTRUCTIONS
Listening to the Radio
1. When listening to an FM station, fully extend the antenna to insure maximum tuner sensitivity.
2. Automatic tuning depends on the signal strength of the broadcasting station, so weak stations are sometimes skipped. Tune manually to find the
weak stations. With stronger stations, the tuner may stop before it reaches optimum setting for that station. Adjust manually for the best reception
if needed.
3. For FM reception, the unit provides FM STEREO/MONO selection. In stereo mode, the unit will automatically switch to stereo when a strong FM
stereo broadcast is received and will indicate “ST” in the LCD.
4. To receive a weaker (noisy) FM station, press the MODE button to switch to MONO mode. The reception may improve, but the sound heard is
MONO.
Using the Preset Channels
This radio is equipped with 10 preset memories for AM and 20 preset memories for FM. Once they are preset, they can be instantly accessed by keying in
the preset channel using the PRESET T/S
button.
1. Press the POWER button to turn on the unit.
2. Press the Button to switch the unit into radio mode and to select band as desired.
3. Tune to a desired station.
4. Press the MEMORY button. PRESET Indicator appears. Channel Indicator “01” appears and blinks.
5. While the Channel Indicator is blinking, press the PRESET T/S button to select the desired preset channel.
6. Press the MEMORY button again to confirm when the desired preset channel appears in the LCD.
7. Tune to another station and repeat steps 4 to 6 to store a new station in another preset channel.