Stereo Audio System for Your iPod® Instruction Manual Model: i198/i199 Please read this manual carefully before operating and save it for future reference. Have a question? Please visit www.i-Luv.
Stereo Audio System for Your iPod V11M11_IM_EN_03282007 -1- www.i-Luv.
Stereo Audio System for Your iPod V11M11_IM_EN_03282007 USER SAFETY GUIDE INSTRUCTIONS ON ENVIRONMENT PROTECTION Do not dispose of this product in the usual household garbage at the end of its life cycle; bring it to a collection point for the recycling of electrical and electronic appliances. This symbol on the product means the instructions for use or the packing will inform about the methods for disposal. The materials are recyclable as mentioned in its marking.
Stereo Audio System for Your iPod V11M11_IM_EN_03282007 USER SAFETY GUIDE IMPORTANT SAFETY INSTRUCTIONS – CONTINUED 7. POWER SOURCES – The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance itself. 8. CLEANING – The appliance should be cleaned with a dry cloth. 9. OBJECT AND LIQUID ENTRY – Care should be taken so that objects do not fall and liquids are not spilled into the device’s openings. 10.
Stereo Audio System for Your iPod V11M11_IM_EN_03282007 USER SAFETY GUIDE FCC NOTICE (USA) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Stereo Audio System for Your iPod V11M11_IM_EN_03282007 USER SAFETY GUIDE About Electromagnetic Interference (EMI) This device is designed and manufactured not to exceed the exposure limit for radio frequency energy, which is set by the Federal Communications Commission of the U.S government. The term “EMI” is short for the electromagnetic interference caused by the electromagnetic field generated by electronic devices.
Stereo Audio System for Your iPod V11M11_IM_EN_03282007 -6- www.i-Luv.
Stereo Audio System for Your iPod V11M11_IM_EN_03282007 TABLE OF CONTENTS Getting Started General features ……………………………………………………………………………………………………………………………………………...… Installing the AC Power …………….……………………………………………………………..………………………………………………………..… Installing the backup battery for clock and alarm settings ………………..……………………….………………………………………………………. Installing the remote control battery ….....………………………………………………………………………………………………………….
Stereo Audio System for Your iPod V11M11_IM_EN_03282007 GETTING STARTED Congratulations on your purchase of the new iLuv i199 for your iPod. Uniquely designed to work with your iPod, this iLuv stereo audio system with built-in universal dock provides advanced audio and radio performance that brings out the best in your music. Remember to keep this manual for future reference.
Stereo Audio System for Your iPod V11M11_IM_EN_03282007 GETTING STARTED IMPORTANT: 1. Occasionally, files on your iPod can become corrupted. This may cause an erratic behavior with your iLuv products. Apple Computer recommends that you visit their website www.apple.com to obtain instructions on resetting or restoring your iPod to factory settings. 2. It is imperative that you use the correct dock adapter for your iPod and that the dock adapter fits appropriately into the built-in universal dock.
Stereo Audio System for Your iPod V11M11_IM_EN_03282007 GETTING STARTED Installing the Backup Battery for Clock and Alarm Settings -Continued 2. Locate the battery compartment on the bottom of the unit and open. 3. Insert two (2) “AA” batteries, following the correct polarity (+/-) drawings inside the battery compartment. For longer battery life, alkaline batteries are suggested. Please note that new and used batteries should not be mixed.
Stereo Audio System for Your iPod V11M11_IM_EN_03282007 GETTING STARTED Installing the Remote Control Battery The remote control battery is included. Before operation, please install it to the battery compartment of remote control. 1. Locate the battery compartment on the bottom of remote control and open. 2. Insert a “CR2032” 3V lithium battery. Make certain to follow the correct polarity, following the directions of the corresponding symbols (+/-) as marked. 3.
Stereo Audio System for Your iPod V11M11_IM_EN_03282007 GETTING STARTED Location of Controls on the Main Unit 1. MULTI/DISPLAY 2. EJECT 3. iPod Dock 4. 7. USB port Docking door OPEN 5. 8. BluePin dock SLEEP 6. 9. ID3/ST. FUNCTION 10. VOLUME+/-( ) 11. Power ON/OFF/ Alarm off 12. SNOOZE/DIMMER 13. WAKE TO 14. FF/Up 15. STOP 16. FR/Down 17. PLAY/PAUSE PRESET 18. AM/FM 19. ALARM 1 20. ALARM 2 21. MEMORY 22. TIME SET 23. PLAY MODE 24. DOCKING DOOR - 12 - www.i-Luv.
Stereo Audio System for Your iPod V11M11_IM_EN_03282007 GETTING STARTED Location of Controls on the Main Unit- continued 25. AC Power cord 26. FM Antenna 27. Aux In Socket 28. AM Loop Antenna Socket 29. iPod AV Out Socket 30. Backup Battery Compartment Location of Controls on the Remote Control 1. POWER 2. ALBUM +/- 3. PLAY/PAUSE PRESET 4. FR /Down 5. VOLUME +/- 6. MEMORY 7. SLEEP 8. FUNC 9. STOP/ AM/FM 10. FF/Up 11. PLAY mode 12. MUTE - 13 - www.i-Luv.
Stereo Audio System for Your iPod V11M11_IM_EN_03282007 GETTING STARTED Location of Indications on the LCD Screen - 14 - www.i-Luv.
Stereo Audio System for Your iPod V11M11_IM_EN_03282007 OPERATIONAL INSTRUCTIONS Setting the Clock 1. To set the time, locate the TIME SET button. Press and hold the TIME SET button down until the Time display begins to flash. Set desired hour by using or control button on the unit. Once desired hour is selected, press the TIME SET button once more to set Minutes. Use or control button until the desired time is displayed. (NOTE: AM / PM indicator displays are located on the left side of the time.
Stereo Audio System for Your iPod V11M11_IM_EN_03282007 OPERATIONAL INSTRUCTIONS Using the Alarm Function –Continued 2. To activate or deactivate the alarm, press the ALARM 1 or ALARM 2 button once. Notes: To preview alarm setting, the alarm must be activated before pressing Wake To Button. 3. To snooze, press the SNOOZE / DIMMER button on the i199, following the sounding of the alarm. The alarm will then shut off and will sound again in approximately 9 minutes.
Stereo Audio System for Your iPod V11M11_IM_EN_03282007 OPERATIONAL INSTRUCTIONS Setting the Sleep Time 1. To enter sleep mode, press the SLEEP button while the i199 is on. The unit will automatically turn off after the selected time. The sleep mode also has a feature called the “Gentle Sleep”, which gradually decreases the volume. 2. To adjust the sleep time, press the SLEEP button again and choose from 120, 90, 60, 30, and 15 minutes. 3.
Stereo Audio System for Your iPod V11M11_IM_EN_03282007 OPERATIONAL INSTRUCTIONS Programming Preset Stations 1. Select AM or FM using AM/FM button on the i199 unit. 2. Tune to the desired station using or buttons on the i199 unit or remote control. 3. Select between Stereo or Mono by pressing ID3/ST button. (FM ONLY) 4. Press MEMORY button to start programming. You will notice flashing preset number next to station you’ve just selected. 5.
Stereo Audio System for Your iPod V11M11_IM_EN_03282007 OPERATIONAL INSTRUCTIONS Listening to CDs/MP3-CDs The i199 features a slide-in mechanism for easy loading and unloading 1. Press FUNC. button to select the CD mode. 2. Insert the MP3-CD/CD disc in the loading bay. • FOR CD After a few seconds, the total playing time and number of tracks appear on the display. • FOR MP3-CD After a few seconds, the total number tracks, album of MP3 and STOP appear on the display.
Stereo Audio System for Your iPod V11M11_IM_EN_03282007 OPERATIONAL INSTRUCTIONS Selecting a Different Track During Play -Continued 3. Press and hold or buttons to search through the track. Programming Tracks Up to 32 tracks can be stored in the memory. 1. Load an MP3-CD/CD as described previously. 2. Press MEMORY key to start programming. 3. Press or buttons to locate a particular track or album/track (MP3-CD). 4. Press MEMORY key to store it in the memory. 5.
Stereo Audio System for Your iPod V11M11_IM_EN_03282007 OPERATIONAL INSTRUCTIONS Clearing Program Tracks Press MEMORY button, the LCD will display the first programmed tracks, pressing the STOP button will erase all programmed tracks.
Stereo Audio System for Your iPod V11M11_IM_EN_03282007 OPERATIONAL INSTRUCTIONS Listening to your favorite music on your USB Storage device The i199’s USB connector allows you to listen to stored MP3 and Wma files on your USB Storage device 1. Open the DOCKING DOOR. 2. Insert the USB device with MP3 or WMA files in the USB Socket. 3. Press FUNC. button and select USB mode, the total number tracks, albums of MP3 and STOP appear on the display. 4.
Stereo Audio System for Your iPod V11M11_IM_EN_03282007 OPERATIONAL INSTRUCTIONS Using AV out port to watch Video on your iPod from an External Monitor or TV – Continued Note: The line output is not affected by the volume setting on the i199. Please use the volume control of the external device to increase or decrease the volume level.
Stereo Audio System for Your iPod V11M11_IM_EN_03282007 OPERATIONAL INSTRUCTIONS Listening to Other Audio Devices using line-in port You can still listen to the first, second, and third generations of iPod, or any other audio players other then iPod, with the i199 by simply using the AUX-IN port, located on the rear of the i199. 1. Insert the plug of the audio patch cord (Not Included) into the HEADPHONE or LINE-OUT jack on your audio device, and then insert the other end of 2. the patch cord with 3.
Stereo Audio System for Your iPod V11M11_IM_EN_03282007 OPERATIONAL INSTRUCTIONS BluePinTM Setup and operating Instructions.
Stereo Audio System for Your iPod V11M11_IM_EN_03282007 OPERATIONAL INSTRUCTIONS 1. Plug the BluePinTM unit securely into the i199’s BluePinTM port. When BluePinTM is plugged in, BluePinTM status below : TX selection: Status indicator will slow flash (standby mode) RX selection: Status indicator will fast flash (search mode) 2.
Stereo Audio System for Your iPod V11M11_IM_EN_03282007 OPERATIONAL INSTRUCTIONS 4. You are now ready to pair with other devices with Bluetooth technology. 5. Before pairing make sure to set the BluePinTM as TX or RX depending on the purpose. Note: TX is for transmitting signals to other devices like stereo headsets with Bluetooth technology with A2DP Profile.
Stereo Audio System for Your iPod V11M11_IM_EN_03282007 OPERATIONAL INSTRUCTIONS Example (TX Mode): If you have a Stereo Headset with Bluetooth technology (Mono will not work, only stereo headphone with A2DP Bluetooth profile will work), you can set the BluePinTM to Transmit (TX) the music that is currently playing on i199 to the headphone. NOTE: Certain Headsets with Bluetooth technology are not compatible with the BluePinTM, please check with your dealer for compatibility.
Stereo Audio System for Your iPod V11M11_IM_EN_03282007 OPERATIONAL INSTRUCTIONS • • • • BUTTONS Push pairing button on the headset with Bluetooth technology until red and blue lights flash. When both units are no longer flashing red and blue lights, and a blue light flashes steadily you are now connected and can send music from i199 to Headset with Bluetooth wireless technology.
Stereo Audio System for Your iPod V11M11_IM_EN_03282007 MAINTENANCE & TROUBLESHOOTING GUIDE Maintenance • Place the unit on a leveled surface away from sources of direct sunlight or excessive heat. • When placing the unit on a natural wood and lacquered finish, a cloth or other protective material should be placed between it and the furniture to avoid any damage to the unit and the furniture. • Clean the unit with a soft cloth moistened only with mild soap and water.
Stereo Audio System for Your iPod V11M11_IM_EN_03282007 MAINTENANCE & TROUBLESHOOTING GUIDE Troubleshooting – Continued • Your iPod is not charged even though it is in the dock. o Your iPod might not be properly docked. Take your iPod out of the dock, and remove any obstructions on the connector from the dock and on your iPod. Place your iPod back into the dock. o Your iPod is frozen or locked up. Check whether your iPod operates correctly before placing it back into the dock.
Stereo Audio System for Your iPod V11M11_IM_EN_03282007 MAINTENANCE & TROUBLESHOOTING GUIDE Troubleshooting – Continued • • o Make sure you are not too far away from the unit. o Make sure you are free from any interfering devices such as walls and any other wireless devices. o Check if the BluePinTM unit is securely connected to the i199’s BluePinTM Port. Pairing with other devices with Bluetooth technology with BluePinTM is not working. o Make sure TX/RX switch is set correctly on the BluePinTM.
Stereo Audio System for Your iPod V11M11_IM_EN_03282007 SPECIFICATIONS General • Power Requirement o Main Unit: AC 120V/60Hz (USA) 230V50Hz (EURO) • Output Power: 8W (RMS) into 8 ohm • Power consumption: 40W Radio • Frequency Ranges: MW 522 - 1620kHz / FM 87.5 - 108MHz (EURO); AM 530 – 1710kHZ / FM 87.
Stereo Audio System for Your iPod V11M11_IM_EN_03282007 - 34 - www.i-Luv.
TEL: 516-626-7188 FAX: 516-626-7105 website: www.i-Luv.com e-mail: info@i-Luv.com iLuv is a trademark of jWIN Electronics Corp. iPod is a trademark of Apple Computer Inc. iPod is not included in this package. Features and specifications are subject to change without prior notification. BluePin is a trademark of jWIN Electronics Corp. The Bluetooth word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by jWIN Electronics Corp. is under license.