Operation Manual

Headset w/ Bluetooth technology V11M11_IM_EN_10122007
www.i-Luv.com
- 14 -
OPERATING INSTRUCTIONS
Making a Call
This headset must also be paired with your phone, enabled by
Bluetooth wireless technology in order to make a call.
1. Normal dialing: Press the CALL button
and dial the telephone number on your
mobile phone. When the call connects, it
will be heard through the headset.
2. Switching calls from phone to headset
of headset to phone: Press the CALL
button for two (2) seconds during active
phone call. If the phone and headset are
pared, the call will be transferred from
headset to phone or phone to headset.
3. Last number redial: After a call has been made, the number
can be automatically redialed by pressing the CALL button.
4. Voice dial function: Press and hold the CALL button for two
(2) seconds until you hear a short beep followed by a long
beep.
Answering a Call
Be certain the headset is properly paired with a mobile phone
featuring Bluetooth wireless technology before answering a call.
1. An incoming phone call will be indicated by a ring. Press the
CALL button once to answer the call.
2. If the headset is off when there is an incoming call, press the
Multi-function button to turn on the headset and press the
CALL button to answer the call as usual.