Headset with Bluetooth® Wireless Technology Instruction Manual i315 Please read this manual carefully before operating and save it for future reference. Have a question? Please visit http://www.i-Luv.
Headset w/ Bluetooth technology V10M10_IM_EN_04252007 USER SAFETY GUIDE INSTRUCTIONS ON ENVIRONMENT PROTECTION Do not dispose of this product in the usual household garbage at the end of its life cycle; bring it to a collection point for the recycling of electrical and electronic appliances. This symbol on the product means the instructions for use or the packaging will inform about the methods of disposal. The materials are recyclable as mentioned in its marking.
Headset w/ Bluetooth technology V10M10_IM_EN_04252007 USER SAFETY GUIDE Important Safety Instructions-Continued sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat. 7. Power sources – The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 8. Cleaning – The appliance should be cleaned with a dry cloth. 9.
Headset w/ Bluetooth technology V10M10_IM_EN_04252007 USER SAFETY GUIDE FCC Notice (USA)-Continued communications, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Headset w/ Bluetooth technology V10M10_IM_EN_04252007 USER SAFETY GUIDE Additional Safety Instructions • • When not in use, keep your device in a safe place where it will not be bent or crushed. Keep this device away from children. Some small and detachable parts might be swallowed by children and result in harm to them.
Headset w/ Bluetooth technology V10M10_IM_EN_04252007 USER SAFETY GUIDE IMPORTANT NOTES ON HEARING Your hearing is very important to you and to us. We strongly recommend you to follow the guideline below in order to prevent possible damage to or loss of hearing. Hearing experts caution that listening to loud sounds can damage hearing over time. With continuous listening to loud sounds, hearing adapts and will give the impression that volume has reduced. What seems normal may, in fact, be harmful.
Headset w/ Bluetooth technology V10M10_IM_EN_04252007 TABLE OF CONTENTS GETTING STARTED Introduction. …..………..……………………………………… What’s Included in the Package…………………………..… What is Bluetooth wireless technology? ............................. Location of Controls…………………………………………… Charging the Headset………………………………………… Turning on the Headset………………………………………. Turning off the Headset………………………………………. Pairing the Headset using Bluetooth Wireless Technology.
Headset w/ Bluetooth technology V10M10_IM_EN_04252007 GETTING STARTED Headset with Bluetooth Wireless Technology Thank you for purchasing the i315 from iLuv. This headset has been designed wireless mobile phone connection using Bluetooth wireless technology. Please keep this manual in a safe place for future reference.
Headset w/ Bluetooth technology V10M10_IM_EN_04252007 GETTING STARTED What’s included in the package? • • • • • Headset Charger Spare ear cushion Instruction manual Warranty card What is Bluetooth wireless technology? Bluetooth wireless technology is a short-range wireless communication technology intended to replace the cables connecting electronic devices while maintaining the high level of security.
Headset w/ Bluetooth technology V10M10_IM_EN_04252007 GETTING STARTED LOCATION OF CONTROLS 5 1 2 6 3 7 4 1. Ear hook 2. Indicator light 3. Volume control 4. Microphone 5. Charging port 6. Multi-function button 7. Air-cushioned ear piece / speaker -9- www.i-Luv.
Headset w/ Bluetooth technology V10M10_IM_EN_04252007 GETTING STARTED Charging the Headset Fully charge the headset by connecting the charger to the mini-USB port on the top of the headset. The red indicator will light up when charging. Once fully charged, the red indicator will go out. Turning on the Headset Press and hold the Multi-function button for approximately five (5) seconds until the blue indicator light begins flashing. Note: The blue indicator will continuously flash when the power is on.
Headset w/ Bluetooth technology V10M10_IM_EN_04252007 GETTING STARTED Pairing the headset with mobile phones using Bluetooth wireless technology 1. With the power turned off, press and hold the Multi-function button for approximately seven (7) seconds. 2. Blue and Red lights will blink alternatively. 3. Set both the i315 and the mobile phone to SEARCH mode following the pairing instructions included with the phone, placing both units close together.
Headset w/ Bluetooth technology V10M10_IM_EN_04252007 GETTING STARTED Notes on Pairing This headset will not be recognized by your mobile phone unless it is properly paired. The i315 cannot pair with mobile phones which are not equipped with Bluetooth wireless technology. To ensure that correct pairing is accomplished, it is important to follow both these instructions and those which accompany the corresponding mobile phone. Wearing the Headset The i315 can be worn on either the left of right ear. 1.
Headset w/ Bluetooth technology V10M10_IM_EN_04252007 OPERATING INSTRUCTIONS Making a Call This headset must also be paired with your phone, enabled by Bluetooth wireless technology in order to make a call. 1. Normal dialing: a. Dial the telephone number on your mobile phone. b. When the call connects, it will be heard through the headset. 2. Last number redial: After a call has been made, the number can be redialed by short-pressing the Multi-function button. 3.
Headset w/ Bluetooth technology V10M10_IM_EN_04252007 OPERATING INSTRUCTIONS Answering a Call Be certain the headset is properly paired with a mobile phone featuring Bluetooth wireless technology before answering a call. 1. An incoming phone call will be indicated by a ring. Press the Multi-function button once to answer the call. 2. If the headset is off when there is an incoming call, press the Multi-function button to turn on the headset and answer the call as usual.
Headset w/ Bluetooth technology V10M10_IM_EN_04252007 OPERATING INSTRUCTIONS Answering a call while already on the Phone With the i315, it is possible to answer an incoming call while already on the phone. 1. There will be a sound inflection during the phone conversation. Press and hold the Multi-function button until there is a beep. The previous call will be placed on hold without disconnecting and the incoming call can be answered. 2.
Headset w/ Bluetooth technology V10M10_IM_EN_04252007 OPERATING INSTRUCTIONS Call Waiting (3-Way Calling) If your mobile phone supports the Hands-Free Profile (HFP), you can use the Call Waiting (3-Way Calling) function on i315. 1. Press and hold the Volume Down (T) button for approximately four (4) seconds until three (3) short beeps are heard through the headset. This enables an incoming / waiting call to be picked up and ends the current call. 2.
Headset w/ Bluetooth technology V10M10_IM_EN_04252007 TROUBLESHOOTING GUIDE 1. The headset does not work with my mobile phone. Be certain that your mobile phone is equipped with Bluetooth wireless technology. This headset will only work with such mobile phones. Additionally, your mobile phone must be paired with the headset BEFORE all other pairing. 2. There is interference on the headset with my phone. The maximum distance for Bluetooth wireless communication is 33 feet (10 meters).
Headset w/ Bluetooth technology - 18 - V10M10_IM_EN_04252007 www.i-Luv.
TEL: 516-626-7188 FAX: 516-626-7105 website: www.i-Luv.com iLuv is a trademark of jWIN Electronics Corp. Features and specifications are subject to change without prior notification. iPod is a trademark of Apple Computer, Inc. The Bluetooth word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by jWIN Electronics Corp. is under license. Mobile phone not included in this package. © 2007 jWIN Electronics Corp. All rights reserved.
