Operation Manual
OPERATIONAL INSTRUCTIONS
BluePin Setup and operating Instructions - continued
d. When both units are no longer ashing red and blue lights, and ash a steady blue light
you are now connected and can send music from i399/i398 to a headset with Bluetooth
wireless technology. The speakers of i399/i398 will be muted after it connects to Bluetooth
headset, you can press the MUTE button or VOLUME buttons to release mute. After turning
o the Bluetooth headset, or Bluetooth headset is out of transmitting range, the speakers
mute will be released.
e. After paired with Bluetooth headset, the pairing information will be stored in both devices
even if one or both of them have been turned o. Next time you turn on both devices, you
don’t need pair them again, just follow one of following methods to connect them.
- After turning on the Bluetooth headset, it will connect i399/i398 automatically. If Bluetooth
headset doesn’t have automatic connection function, just press PLAY/PAUSE button to
connect i399/i398.
- Or press the PAIRING button of BluePin or the PAIRING button of i399/i398 to connect
Bluetooth headset.
- If Bluetooth headset is in standby mode, press the PLAY/PAUSE button of Bluetooth headset
to connect i399/i398.
f. You can remote control i399/i398 by using function buttons of Bluetooth headset, details
as follows:
iLuv | 19i399/398 | V11M11_IM_EN_0120200918 | iLuv
Note: Depending on the Bluetooth headset, these functions might be disabled due to software issues.
BUTTONS
PLAY/PAUSE
STOP
PREV
NEXT
iPod
Play/Pause
Previous song
Next song
FM
Preset
Function select (iPod, FM, Aux)
Auto searching-Forward
Auto searching-Backward
AUX
N/A
N/A
N/A
MAINTENANCE & TROUBLESHOOTING GUIDE
Maintenance
· Place the unit on a leveled surface away from sources of direct sunlight or excessive heat.
· When placing the unit on a natural wood and lacquered nish, a cloth or other protective
material should be placed between it and the furniture to avoid any damage to the unit and
the furniture.
· Clean the unit with a soft cloth moistened only with mild soap and water. Stronger cleaning
agents, such as Benzine, thinner or similar materials can damage the surface of the unit.
Troubleshooting
· The stereo speaker system does not turn on.
- The AC adapter may not be connected properly. Check the connection.
- The wall outlet may not function. Try another outlet.
· Your iPod does not t into the built-in universal dock.
- The installed dock adapter is not the correct one. Check whether a correct dock adapter
is installed.
- There might be some obstructions on the dock. Check whether there are any obstructions on
the connector and on the dock. If everything is secured, place your iPod back into the dock.
· It does not recognize your iPod when docked.
- Your iPod may not be properly docked. Take your iPod out of the dock, and remove any
obstructions on the connector from the dock and on your iPod. Place your iPod back into
the dock.
- Your iPod may be frozen or locked. Check whether your iPod operates correctly before placing
it back into the dock. Please refer to the owner’s instruction manual of your iPod.
- The software of your iPod is outdated. Upgrade the software on your iPod. For the details on
how to upgrade the software on your iPod, please visit the Apple website:
http://www.apple.com.
- You are using the rst or second generation iPod. The i399/i398 does not recognize them.
Use the AUX-in jack for them.