Operation Manual
OPERATIONAL INSTRUCTIONS
1. To set the time, locate the TIME button. Press and hold the TIME button down until the display
begins to ash. First setting is to set the year. Press the SEARCH/SKIP buttons to change the
year, press the TIME button once more to conrm and enter to Month setting.
2. Press the SEARCH/SKIP buttons until the desired month is displayed, press the TIME button
again to conrm and enter to date setting.
3. Press the SEARCH/SKIP buttons until the desired date is displayed, press the TIME button again
to conrm and enter to time system selection.
4. Press the SEARCH/SKIP buttons to select 12H or 24H time system, press the TIME button again
to conrm and enter to hour setting.
5. Press the SEARCH/SKIP buttons until the desired hour is displayed, press the TIME button again
to conrm and enter to minute setting. Please note the AM, PM setting if the time system set to 12H.
6. Press the SEARCH/SKIP buttons until the desired minute is displayed, press the TIME button
once more to conrm and exit time setting.
Setting the Time
1. After connected to the included external DC power supply or installed 8x”D” batteries, the unit
will be in standby state as default, press the POWER button of unit or remote control to turn on
the unit.
2. To turn o the unit, press the POWER button again, unit will enter to standby state with time
(clock or date) display on LCD.
3. Press and hold the POWER button for three (3) seconds enter to sleep mode, at this state,
nothing displays on LCD and the backlight of LCD will go out.
Turning the unit ON / OFF
iLuv | 9i399/398 | V11M11_IM_EN_012020098 | iLuv
1. After turn on the unit, the woofer light will be turned on at the same time as default, to turn o
it, press and hold the MUTE button of unit or remote control for three (3) seconds.
2. To turn on the woofer light, press and hold the MUTE button for three (3) seconds again.
Turning the woofer light ON / OFF
OPERATIONAL INSTRUCTIONS
Listening to Your Favorite Radio Station
For the best FM radio clarity, fully extend the rod antenna, and rotate it for best reception.
1. Press the POWER button to turn the unit on, press the MODE button on the i399/i398 or the FM
button on the Remote Control. The radio frequency will appear on the display.
2. To tune in to a desired station, press the SEARCH/SKIP buttons on the i399/i398 or
Remote Control.
3. To scan the next clear station, press and hold the SEARCH/SKIP buttons on i399/i398 or the
Remote Control for 1 second. Press again to enter the seek mode.
4. To adjust the volume, rotate the VOLUME +/– buttons on the i399/i398 or remote control.
To power OFF, press the POWER button (or the POWER button on the Remote Control).
1. Set to FM radio by using MODE button of i399/i398 or FM button of remote control.
2.
Tune to the desired station using SEARCH/SKIP buttons on the i399/i398 unit or remote control.
3. Press and hold MEMORY button to start programming. You will notice ashing preset number
on the LCD.
4. Press the PRESET/PLAY/PAUSE button to select the preset station number.
5. Press MEMORY button again to save and store the station.
6. Repeat above 2-5 steps to store other presets into the memory, total 20 preset stations can
be stored.
Programming Preset Stations
1. Set to FM radio using MODE button of i399/i398 unit or the FM button of remote control.
2. Press the PRESET/PLAY/PAUSE button to select the desired preset stations, you can press and
hold the PRESET/PLAY/PAUSE button for quick searching.
Listening to the preset stations