Operation Manual

OPERATIONAL INSTRUCTIONS
Overview:
Status Indicator mode
• No light:
Not in operation and power o
• Blue Light slow ashing:
Normal standby mode
• Blue Light fast ashing:
Search Mode
• Blue & Red Light Flashing:
Pairing Mode
• Solid Blue Light:
Paired with a device
SEND: Transmitting sound to other devices such as Stereo Headset with Bluetooth technology
with Bluetooth stereo Prole (A2DP)
RCV: Receiving sound from other media players such as MP3 Cell Phones with Bluetooth Stereo
Prole (A2DP) or other media players with Bluetooth Stereo Prole (A2DP). Also it can
receive the phone call from a cell phone with Bluetooth hands-free prole (HSP and HFP).
Note: Certain devices with Bluetooth technology might not be compatible with the BluePin, please check with your dealer for
compatibility. The best product for this operation is iLuv Stereo Headsets with Bluetooth technology which are fully compatible
with the BluePin.
1. Plug the BluePin unit securely into the
i399/i398 BluePin port with below status on
BluePin indicator :
SEND: Blue indicator will slow ash (STANDBY
mode) or RCV: Blue indicator will fast ash
(SEARCH mode)
BluePin Setup and operating Instructions
iLuv | 13i399/398 | V11M11_IM_EN_0120200912 | iLuv
Pairing Button
SEND/RECEIVE Switch
SEND mode indicator
RCV mode indicator
Microphone
OPERATIONAL INSTRUCTIONS
BluePin Setup and operating Instructions - continued
2. Notice that when the BluePin is connected, main display will show the Bluetooth logo and
the current status of the SEND/RCV (RX) mode. Example shows the BluePin is set to Transmit /
TX (SEND).
3. Once the BluePin is securely attached to the i399/i398, press the BluePin ON / OFF button on
the i399/i398 and press the SEND/RCV button on the right side of BluePin to select the working
mode (Transmit or Receive).
4. Long press the PAIRING button of BluePin or i399/i398 unit for three (3) seconds to start pairing
with other devices. You will notice that blue and red light ashing from the unit which indicates
device is ready to be paired with other devices with Bluetooth technology.
5. Now, you are ready to pair with other devices with Bluetooth technology.
6. Before pairing make sure to set the BluePin as SEND or RCV (receive) depending on your intention.
NOTE: SEND is for transmitting signal to other devices like stereo headset with Bluetooth technology with A2DP Prole. RCV is for
receiving signal from other sources like a cell phone with Bluetooth stereo prole (HFP, A2DP) or Media Players equipped with
Bluetooth Stereo Prole (A2DP).
Display indicating the Bluetooth mode