Operation Manual

High Fidelity Mini Audio System for iPod V10M11_IM_EN_12182007
www.i-Luv.com - 27 -
OPERATIONAL FEATURE
Compact Disc Operation – Continued
Search operation
While the CD is in play mode you can scan tracks by holding down  TUNING +
SKIP/SEARCH and TUNING - SKIP/SEARCH. The CD will continue to play until you find the
track you want. When you release the button the unit will resume normal play mode.
Track intro-scan
1. Press INTRO while in stop mode to play the first 10 seconds of each track on all inserted
CDs.
2. Press INTRO again and the selected track will play.
Mute function
If the MUTE button is pressed, the audio output will be muted, and the "MUTE" indicator will be
displayed. To cancel “MUTE” press the MUTE button once more or press the VOLUME
UP/DOWN button.
Program memory
The built-in program memory lets you play up to 40 tracks (from up to 4 CDs) in the order of
your choice. A track can be stored more than once within the program.
1. Load the CDs.
2. Press MEM./CLK ADJ. (20)/(53) in the stop mode to switch to programming mode.
3. Select a CD by pressing the corresponding DISC 1 - 4 button.
4. Select the desired track using the numerical buttons 0 - 9 / +10 on the remote control or by
repeatedly pressing  TUNING + SKIP/SEARCH and  TUNING + SKIP/SEARCH.
5. Press MEM./CLK ADJ. to save the track in the first program location. For example, if you
selected CD 1, track number 14, it will appear in Program position 1 as shown below