Specifications
OPERATIONAL INSTRUCTIONS
Listening to the Radio
Note: Unwind and extend antenna to its full length. It may be necessary to adjust the direction of this wire antenna until
you nd the position that provides the best reception for your favorite FM stations.
1. Press POWER/MODE/AL OFF to Power on the unit. To select radio, press POWER/MODE/AL OFF
until “FM” icon is shown on the top of display.
2. FM radio frequency will show on the display.
3. Tune to the desired frequency as follows:
a) Automatic Tuning
i) Press and hold
or for three (3) seconds. Auto tuning will start.
ii) The tuner will search the frequency for the next strong station and stop on that
station. Repeat this procedure until the tuner stops on your desired station.
b) Manual Tuning
Repeatedly press
or until the frequency of the desired station appears on the display.
After entering the radio mode for about 3 seconds, the display will show the time mode
again. Press TIME SET again to show the radio frequency.
4. Preset FM stations in the tuner memory
This unit includes a 10 station preset memory. Store up to 10 FM stations in the tuner memory
for immediate recall. The procedure for storing stations in memory is as follows:
a) Preset FM channel
i) Follow instructions above to select the rst station you wish to
memorize and the FM frequency will show on the display. For example: FM 91.8 MHz.
ii) Press and hold SLEEP/MEMORY, the preset channel number “P-1” begins ashing on the
display
iii) Press
/PRESET to select preset channel (P-1 to P-10)
iv) Press SLEEP/MEMORY to conrm.
v) Repeat step i) to iv) to until you have memorized up to 10 stations. Press
/PRESET to
listen to preset FM channel P-1 to P-10 at FM radio mode.
Note: The saved preset station will be lost if the AC Power is interrupted and the backup battery is not inserted.
iLuv | 8iMM153 | V10M10_IM_EN_02022011