Specifications

OPERATIONAL INSTRUCTIONS
Connect the Audio Output jacks of your auxiliary sound source (MP3 player, CD player, Laptop, TV,
etc.) to the AUX IN jack on the back panel of the unit. The auxiliary function will only activate
when the aux in jack is tted with connection cable.
1. Press POWER/MODE/AL OFF to select AUX function. “
” will show on the top of the display
2. Turn your auxiliary source ON and operate it as usual. The sound from the auxiliary source will
be heard through the speakers of the iMM153.
3. Adjust the VOLUME level controls of this unit and the auxiliary sound source as desired.
Note: Connection cables are not included with this unit.
AUX In
Press SNOOZE/DIMMER to adjust the brightness of the display. It will return to normal after
three(3) seconds. Brightness setting ranges from OFF to 9.
Adjusting the Brightness of the LCD Screen
9 | iLuv
Charging your iPod
If your iPod is connected to the unit, it will charge automatically.
Maintenance
• Place the unit on a level surface away from sources of direct sunlight or excessive heat.
• Protect your furniture when placing your unit on a natural wood and lacquered nish. A cloth
or other protective material should be placed between it and the furniture.
• Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning
agents, such as Benzine, thinner or similar materials can damage the surface of the unit.
Resetting the Unit
If the system does not respond, there may have been a power surge that triggered the internal
computer to shut down automatically. If this occurs, disconnect the main power and connect it
again after approximately one minute.