Specifications
OPERATIONAL INSTRUCTIONS
Setting the Clock
1. In standby mode, press and hold TIME SET on the top panel for 3sec. to enter Clock set mode.
2. The hour digit will begin ashing. Press
or to set the hour. Press TIME SET to conrm.
3. When hour is conrmed, minute digit will begin ashing. Press
or to set the minute.
Press TIME SET to conrm.
Setting the Alarm
User is able to set two distinct alarms on the unit.
Press
or to enable Alarm 1 or Alarm 2. When Alarm 1 or Alarm 2 or both Alarm 1 and Alarm 2 is
enabled, icon will be displayed on the LCD. To disable, Press
or again. Icon will disappear
1. Press and hold the
button for three(3) sec. and the hour digit will begin ashing. Press or to
set the hour. Press
to conrm.
2. Minute digit will begin ashing, Press
or to set the minute. Press to conrm.
3. Wake up mode display will begin ashing, Press
or to select from below:
· Wake to FM radio. Pre–tune your desired radio channel in FM radio mode before setting
the wake up function.
· Wake to your iPod.
· Wake to Buzzer.
· Wake to Shaker. Make sure the Shaker is plugged in into “SHAKER” behind the unit.
Notes: Shaker can be combined with other wake to modes.
When FM radio, iPod, or Buzzer is selected, the iMM153 will ask whether or not to enable shaker.
When asked, press or to choose “On” or “O” then press to conrm.
* “On” or “OFF” on LCD screen refers to the shaker funtion, not the alarm itself.
4. When the wake up mode is selected, the Alarm indicator appears on the display.
Notes: For Radio wake up and iPod playback,
user must set desired volume for alarm.
The iMM153 will remember last volume
setting to play music for alarm. If the wake up
mode is set to iPod playback with no iPod
connected, it will become the buzzer alarm.
If the wake up mode is set to Shaker but the Shaker is not connected, it will become the buzzer alarm
· To set Alarm 2, press and hold the button and repeat steps 1 to 4 above.
iLuv | 6iMM153 | V10M10_IM_EN_02022011