User's Manual

GB
45
OVEN CARE AND CLEANING
Abrasive detergents and steam cleaning equipment should not be used for cleaning.
WARNING
Do not use harsh abrasive cleaners or sharp metal scrapers to
clean the oven door glass since they can scratch the surface,
which may result in shattering of the glass.
Clean
Assisted cleaning
High temperature cycle (250°C), combined with self-cleaning panels for gentle, non-
invasive cleaning of the cooking chamber.
Correct operation is combined with the use of the lateral panels and catalytic fan cover:
the oven is treated with special enamel with a micro-porous structure, which breaks
down the fat projected thanks to a catalytic oxidisation process which transforms
residues into gaseous products.
The turbo clean function is only activated when no cooking function has been selected,
so: switch on the oven and touch the symbol as shown in the figure for five seconds.
WARNING
The cleaning process takes place at a temperature of 250°C
and lasts one hour. Do not use it for cooking food!!
The oven light is activated and can be switched off and on again at any time.
All the self-cleaning panels will perform effectively for thirty cleaning processes, after
this limit the panels must be replaced.
The panels should be cleaned exclusively with tap water and replacements can be
ordered from your specialised dealer.