CAL/60 CAL/80 CAL/90 230Vac - 50Hz
INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS FOR COOKER HOODS FOR WALL FITTING 230 Vac - 50 Hz Exhausting cooker hood. The equipment is constructed in accordance with European Standards and with the requirements included in the following Directives: 2006/95EC ( Low Voltage Directive), 2004/108 (Electromagnetic Compatibility). 1 INSTALLATION Read the instruction manual before installing and/or using the hood .
aluminium filters need cleaning and, if the hood is a filtering hood, the active carbon filters need to be replaced. Once the timer has been reset (by keeping the T1+T4 button pressed for a few seconds with the exhaust fan turned off), the entire process will present itself again after the next 30 exhausting hours. 5 MAINTENANCE AND REMINDERS Always disconnect the hood from the electrical power supply before any maintenance or cleaning operation.
RANGE HOODS HOOD DUCTING GUIDE Here are some important points to consider when choosing and/or installing a range hood: • An externally ducted range hood will generally outperform a recirculating range hood. • We discourage the use of flexible ducting as this has a significant negative impact on airflow and noise due to turbulence • caused by the ribs. Instead consider using semi-rigid or rigid duct.
NOTES
COD. 395.108.