User Manual

11
Recall Function
After switching off the hob [ ], it is possible to recall the last settings.
cooking stages of all cooking zones (Booster)
minutes and seconds of programmed cooking zone-related timers
Keep warm function
The recall procedure is following:
Press the key [ ]
Then press key pause/recal before the light stops blinking.
The previous settings are again active.
« Keep warm » Function
This function allows liquids to reach and maintain automatically a temperature of 42°C, 70°C or
94°C.
This will avoid liquids overflowing and fast burning the bottom of the pan.
To engage, to start the function « Keep warm » :
Action Control panel Display
42°C to engage press once on key keep warm [ U ] and [
]
70°C to engage press twice on key keep warm [ U ] and [
]
94°C to engage press 3 times on key keep warm [ U ] and [
]
To stop slide on the “SLIDER“ [ 0 ] to [ 9 ]
or press key keep warm until [ 0 ] [ 0 ]
The maximum duration on keep warm is 2 hours.
Bridge Function
This function allows you to use 2 cooking zones at same time with the same features as a single
cooking zone. The booster function isn’t allowed.
Action Control panel Display
Activate the hob press display [ ] [ 0 ]
Activate the bridge press simultaneously on key keep [ 0 ] and [ ]
warm of the 2 cooking zones
Increase bridge slide on the “SLIDER“ [ 1 ] to [ 9 ]
witch indicates the power
Stop the bridge press simultaneously on key keep [ 0 ]
warm of the 2 cooking zones
Control panel locking
To avoid the activation of the cooking zones, in particular during cleaning, the control panel can
be locked (with exception to the On/Off key [ ]).
Action Control panel Display
Locking the hob press key locking during 6s locking light on
Unlock the hob press key locking during 6s locking light off