IVFSD10X DISHWASHER OPERATING & INSTALLATION MANUAL
Thank you for choosing this product. This User Manual contains important information on safety and instructions intended to assist you in the operation and maintenance of your appliance. Please take the time to read this User Manual before using your appliance and keep this book for future reference.
CONTENTS 1.SAFETY INSTRUCTIONS ................................................................................................ 1 1.1. General Safety Warnings ..............................................................................................1 1.2. Installation Warnings .....................................................................................................1 1.3. During Use................................................................................................................
8.CLEANING AND MAINTENANCE ................................................................................. 22 8.1. Cleaning the Machine and Filters ................................................................................22 8.2. Spray Arms ..................................................................................................................22 9.TROUBLESHOOTING .................................................................................................... 23 10.
1. SAFETY INSTRUCTIONS 1.1. General Safety Warnings • Read these instructions carefully before using your appliance and keep this manual for future reference. Please check the packaging of your machine before installation and the outer surface of the machine once the packaging has been removed. Do not operate the machine if it appears damaged or if the packaging has been opened. • Packaging materials protect your machine from any damage that might occur during transportation.
1.2. Installation Warnings • Choose a suitable and safe place to install your machine. • Only original spare parts should be used with the machine. Unplug the machine before installation. Your machine must only be installed by an authorised service agent. Installation by anyone other than an authorised agent may cause your warranty to be void. Check that the indoor electrical fuse system is connected in line with safety regulations. All electrical connections must match the values on the plate.
• it for other purposes. Commercial use will void the guarantee. Do not stand, sit or place loads on the open door of the dishwasher. Only use detergents and rinse aids produced specifically for dishwashers. Our company is not responsible for any damage that may occur due to misuse. Do not drink water from the machine. Due to the danger of explosion, do not place any chemical dissolving agents into the machine’s washing section.
be performed by an authorised service company, otherwise the warranty will be void. Before repair work, the machine should be disconnected from the mains. Do not pull the cable to unplug the machine. Switch off the water tap. Operation at a low voltage will cause a decline in performance levels. For safety, disconnect the plug once a program has finished. To avoid an electric shock, do not unplug the machine with wet hands. Pull the plug to disconnect the machine from the mains, never pull on the cord.
CE Declaration of Conformity We declare that our products meet the applicable European Directives, Decisions and Regulations and the requirements listed in the standards referenced. Disposal of your old machine The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
2. INSTALLATION new hose before connecting. 2.1. Machine positioning When positioning the machine, place it in an area where dishes can be easily loaded and unloaded. Do not put the machine in an area where the ambient temperature falls below 0°C. Read all warnings located on the packaging before removing the packaging and positioning the machine. Place the machine close to a water tap and drain. Take into consideration that the connections will not be altered once the machine is in position.
WARNING: After removing the top panel of your dishwasher, the machine should be placed in a space of the dimensions shown in the figure below. 2.5. Electrical connection WARNING: Your machine is set to operate at 220-240 V. If the mains voltage supply to your machine is 110 V, connect a transformer of 110/220 V and 3000 W between the electrical connection. The earthed plug of the machine must be connected to an earthed outlet supplied by suitable voltage and current.
3. TECHNICAL SPECIFICATIONS 13 3.1. General appearance 1. Worktop 2. Upper basket with racks 3. Upper spray arm 4. Lower basket 5. Lower spray arm 6. Filters 7. Rating plate 8. Control panel 9. Detergent and rinse-aid dispenser 10. Salt dispenser 11. Upper basket track latch 12. Upper Cutlery Basket 13. Turbo Drying Unit: This system provides better drying performance for your dishes. 3.2.
4. BEFORE USING THE APPLIANCE 4.1. Preparing your Dishwasher for first use • Make sure the electricity and supply water specifications match the values indicated in the installation instructions for the machine. • Remove all packaging material inside the machine. • Set the water softener level. • Fill the rinse aid compartment.
4.4. Water Hardness Table Level German dH French dF British dE Indicator 1 0-5 0-9 0-6 L1 is shown on the display. 2 6-11 10-20 7-14 L2 is shown on the display. 3 12-17 21-30 15-21 L3 is shown on the display. 4 18-22 31-40 22-28 L4 is shown on the display. 5 23-31 41-55 29-39 L5 is shown on the display. 6 32-50 56-90 40-63 L6 is shown on the display. 4.5.
In order to change the rinse aid level, follow the below steps before turning on the machine: • Enter the “Settings Menu” and select “3. Rinse-aid: X” • 3. Rinse-aid: X • The machine will display the last setting. • Push the confirmation button and set the level by using up/down buttons. • Push the confirmation button to save setting. • Stored Exit the menu. DE TER GE NT 4.8. Filling the detergent Push the latch to open the dispenser and pour in the detergent.
Upper Basket The upper basket includes a mechanism which enables the height of the basket to be adjusted up (1) or down (2) without having to remove the basket. Hold the basket on both sides and pull it up or push it down, ensuring both sides of the upper basket are in the same position. 1 SOFT TOUCH Top basket Height Adjustable Rack These racks are designed to increase the capacity of the top basket. You can place your glasses and cups on the racks. You can adjust the height of these racks.
Four Folding Racks (15 pc) The folding racks allow easier placement of larger items, such as pots and pans. Each section can be folded separately. The racks can be raised up, or folded down, as shown in the images. 1 basket, after washing. The upper cutlery basket is composed of two pieces that can be separately removed. Remove the left or right section of the cutlery basket in order to obtain more space for items in the upper basket.
5)Multi-functional Rack System The multi-functional rack system is located in the lower basket. It can be used for the placement of mugs or large utensils for washing. To close the racks, fold them from position (a) to position (b). Make sure the clips on the rack fit on the wire (c). The reverse method can be used to open the racks. The racks in the multi-functional rack system have two positions; the lower position (d) and the upper position (e). Take care to fix the racks correctly (f) onto the wire.
5.2.
4. PROGRAMME TABLE Programme Duration (min) Description Prewash 15 To rinse heavily soiled dishes before a wash programme. Mini 14’ 14 Fast programme intended for recently used dishes which are lightly soiled. Suitable for 4 place settings. Quick 30’ 30 Quick wash programme for lightly soiled dishes. Eco (Reference) 1 8 Standard programme for dishes which are used daily but are not heavily soiled. Super 50’ 50 A faster programme for dishes which are used daily but are not heavily soiled.
7. THE CONTROL PANEL 3 4 5 6 7 8 2 1 8 17 9 a- Washing Cycle symbol b- Rinse Cycle symbol c- Drying Cycle symbol d- End Cycle symbol 10 11 18 a 12 13 19 20 b c 14 15 16 21 d 22 1. On/Off button 2. Confirmation button 3. Option button 4. Delay button 5. Start/Pause button 6. Up Selection button 7. Down Selection button 8. Extra Hygiene Indicator 9. Tablet Indicator 10. Half Load Indicator 11. Extra Fast Indicator 12. Extra Silent Indicator 13. Extra Drying Indicator 14.
to add extra drying steps to a programme in order to obtain drier dishes. The Extra Drying Indicator (13) will illuminate. 4. Press the Start/Pause button (5) to start the selected programme. The display will show ‘Program Activated’. 5. The display (21) will show the symbols corresponding to the status of the programme in operation. While the Drying symbol is on, the machine will remain silent for 40 to 50 minutes.
OK OK OK OK OK Extra Silent Extra Drying OK OK OK OK Extra Hygiene OK OK OK OK Extra Fast OK - OK OK - OK OK OK OK Child Lock OK OK OK Tablet OK OK Half Load ( 3 modes ) OK - OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK Extra Silent Extra Hygiene Extra Fast Child Lock Delay Start Half Load (3 modes) Tablet Adding Functions to a Programme 1. Select the appropriate wash programme for your dishes using the Up and Down Selection buttons.(6, 7). 2.
Activated’ will show on the display. -The new programme will resume the course of the old programme. 7.3. Cancelling a Programme Follow the steps below to cancel a programme while in operation. - Press and hold the Start/Pause button (5) for 3 seconds. - The display will count down 3 seconds and show ‘Program Cancelling..X’. When it finishes, ‘Program Finished’ will show on the display. -You can then select another programme, additional functions or delay duration.
‘YES’ or ‘NO’. Select an option for ‘X’ and press the Confirmation button again to save your selection. If the factory settings are restored, the machine will return to the following settings: 1. 2. 3. 4. 5. Language Water hardness Volume Brightness Eco mode : English : L3 : L2 : L2 : No Child Lock After starting a programme, simultaneously press the Up and Down Selection buttons (6, 7) for 3 seconds. The display will show ‘Keep Pressing..X’ until the 3 seconds is complete.
2. 3. Make sure the hydrant is closed Call a qualified technician if this is not the case. If an error occurs that you cannot fix, the warning shown below will be displayed. Call a qualified technician if this is the case. Call Service You can find more information in the “FAILURE CODES AND WHAT TO DO” section in your user guide. Selecting Eco/Normal Mode 3 4 5 1 6 7 8 2 1. Press the Power On/Off button to switch the machine on. NOTE: The factory default setting for Eco mode is ON. 2.
8. CLEANING AND MAINTENANCE the filters. Replace the filter insert, and rotate it clockwise (4). • Never use your Dishwasher without a filter. Cleaning your Dishwasher is important to maintain the machine’s service life. Oil and lime may build up in your Dishwasher over time. If this occurs: • Fill the detergent compartment but do not load any dishes. Select a programme which runs at high temperature and run the Dishwasher empty.
9. TROUBLESHOOTING FAULT The programme does not start. Water remains inside the machine. Machine stops during washing. Shaking and hitting noises are heard during a wash operation. POSSIBLE CAUSE TROUBLESHOOTING Your Dishwasher is not plugged in. Plug your Dishwasher in. Your Dishwasher is not switched on. Switch your Dishwasher on by pressing the On/Off button. Fuse blown. Check your indoor fuses. Water inlet tap is closed. Turn on the water inlet tap. Your Dishwasher door is open.
FAULT Whitish stains remains on dishes. POSSIBLE CAUSE TROUBLESHOOTING Not enough detergent used. Use the correct amount of detergent, as instructed in the programme table. Rinse aid dosage and/or water softener setting set too low. Increase rinse aid and/or water softener level. High water hardness level. Increase water softerner level and add salt. Salt compartment cap not closed properly. Check that the salt compartment cap is closed properly. Drying option is not selected.
AUTOMATIC FAULT WARNINGS AND WHAT TO DO TROUBLE CODE POSSIBLE FAULT WHAT TO DO Make sure the water inlet tap is open and water is flowing F5 Separate the inlet hose from the tap and clean the filter of the hose. Insufficient water Contact for service if the error continues. F3 Continuous water input Close the tap and contact for service. Water discharge hose and filters may be clogged. F2 Inability to discharge water Cancel the program. If the error continues, contact for service.
ILVE LIMITED WARRANTY Eurolinx Pty Limited A.B.N. 50 001 473 347 trading as ILVE (“ILVE”) Office: 48-50 Moore Street, Leichhardt N.S.W 2040 Post: Locked Bag 3000, Annandale, N.S.W 2038 P: 1300 MY ILVE (694 583) WARRANTY REGISTRATION Your ongoing satisfaction with your ILVE product is important to us. We ask that you complete the enclosed Warranty Registration Card and return it to us so that we have a record of the ILVE products you purchased.
ILVE LIMITED WARRANTY 6. Claiming under the Warranty Customers will bear the cost of claiming under this Warranty unless ILVE determines the expenses are reasonable, in which case the customer must claim those expenses by providing written evidence of each expense to ILVE at the address on the Warranty Registration Card. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage.
