Manual

29
INSTALLER
PRELIMINARY INSPECTION
After opening the package, please inspect the equipment
for any possible damage that could have occurred during
transport. If the product is damaged, please take note of
the data printed on the product label (Fig. 3.) and promptly
notify the data to your Supplier.
TRANSPORT
The transportation, loading and unloading of the product
should be performed by personnel wearing all the neces-
sary protections (Fig. 1.).
When handling the equipment, implement all the
necessary precautions to avoid damage to the
same or to people and property, complying with
the instructions found on the packaging.
When handling the equipment, always use clean
cotton gloves to avoid ngerprints.
FIRST-USE PREPARATION
After the hood installation, please remove the protective
lm and carefully clean the external surface (Fig. 2.). Please
note that the use of acid-based cleansers could damage
the hood surface, so use a neutral or a steel-specic
cleanser only.
All packaging and the protective lm must be
disposed of in accordance with the regulations of
the country of use. Always make sure that nothing is
disposed of in the environment.
Packaging materials may be potentially dangerous
for children and animals.
HOW TO READ PRODUCT LABEL
The product label is located inside the hood, usually
attached on its bottom, being visible after the removal of
the anti-grease lters. The label shows essential data and
information about the product regarding installation,
customer service and warranty-related repair, as well as
instructions to determine the correct spare parts for the
specic model.
Please do not remove, damage or alter in any way the
product label, since this could impede the Manufacturer
from identifying the product in case of need.
INSTALLATION
Fig. 1.
Fig. 2.
Tipo motore
Numero di serie
Tipo illuminazione
Nome
commerciale
della cappa
Codice modello
Tensione alimentazione
Potenza totale
Fig. 3.
AM90/SS
AM90/SS
Motor : 1000 m3/h
Lamps: Led 3x1,2 W
Serial n°: CA470079
Voltage: 220/230V 50Hz
AM90/SS 20/11
Max Power: 710W
A Max :

Hood model
Product code
Power voltage
Total power
Hood serial numbe
Type of illumination
Type of motor