Manual

INSTALLER

INSTALLATION

FUME EXHAUST CONNECTION

DUCTING/SUCTION VERSION

This type of hood is equipped with a top air outlet for

discharge of fumes outside the house, which has to be

connected with the inlet of the building chimney,

commonly through a hose (not provided).

Horizontal tube sections must be slightly tilted upwards,

to help channelling of the air to the outside.

Fume discharge tubes crossing particularly cold

environments

(e.g. attics) should be insulated, to prevent condensation

caused by temperature differences.

Suction type hoods DO NOT require carbon lters, which,

on the contrary, can limit their performance.

Any changes to the tube, sudden diameter reductions,

and bends, may prevent the hood from reaching

optimum suction capabilities, and may jeopardise the

operation of the motor, relieving the Manufacturer from

all responsibility.

Make sure that the ue is in perfect working order, and

that a square (concrete) or round (metal) static wind

break ventilation tower with useful output section not less

than double the diameter of the ue is installed at

the top of the ue itself.

cappa ad

evacuazione

esterna

vapori

fumi e

vapori

cappa

a ricircolo

interno

metallici

carbone

attivo

external

evacuation

hood

metal

lters

fumes and

steam