Use and Care for Majestic II

CLEANING AND MAINTENANCE

List with common types of soiling and recommendations how to treat them:

The cleaning of the Ceran glass is identical to other similar surfaces like glass. Do not use corrosive or abrasive clea-

ning agents, such as grill and oven-sprays, stain- and rust-removers, scouring powder and rough sponges.

Before being cleaned, the Ceran glass must be cooled down.

Other maintenance and servicing work other than cleaning as described here, must be done by authorized service

personnel.

Make sure that no liquid can enter in the induction unit.

A good maintenance of the induction cooker requires a regular cleaning, care and servicing.

The operator has to ensure that all components relevant for safety are in perfect working order at all times.

The cooker should be examined at least once a year by an authorized technician.

CAUTION Do not open the induction unit, dangerous electric voltage inside

The cookers may only be opened by authorized personnel.

Type of soiling

Slight soiling,

no burned residues

Sticky soiling

Lime deposits, caused by

water which has boiled over

Sugar, sugar containing food,

plastic, aluminum foil

Drawer

Treatment

Wipe with a moist cloth (scotch), without cleaning agent

Remove with a scraper. Then wipe the heating area with a moist cloth

These spots can be removed with vinegar or a special cleaning agent

Immediately scrape off the sugar, plastic or aluminum foil residues thoroughly

from the hot cooking area, e.g. with a razor blade. After removal of the residues,

clean it with a cleaning agent. If the heating area is soiled with residues of sugar,

plastic or aluminum foil cools down without prior cleaning, the ceramic surface

might become deformed by pinheadsized pits.

Cleaning is the only maintenance that is required.

Warning! Cleaning must be performed with the cooker disconnected from the

power supply.

Do not use aggressive or abrasive cleaning products, abrasive sponges or sharp

objects that can leave marks of abrasion. Do not use steam cleaners for internal

cleaning of the drawer.

Front panel

To clean the front panel, use specic cleaning products such as warm water and

non-abrasive detergents. Apply a small amount of product on a soft cloth and

rub on the surface.

Inside the drawer

Clean the inside of the drawer with a damp cloth. If it is very dirty, add a few drops

of detergent (non-aggressive universal degreaser) to the wash water. Clean the

surface with a dry cloth to dry. Reuse the drawer only when it is completely dry.