Conversion Kit Instruction for Majestic II

IGNITION OF THE “DUAL” BURNER

off

maximum

minimum

index

lighting

ADJUSTMENT OF THE PRESSURE REGULATOR FOR USE WITH DIFFERENT TYPE OF GAS

The pressure regulator supplied with the appliance is a convertible type pressure regulator for use with Natural

Gas at a nominal outlet pressure of 5”w.c. or Propane at a nominal outlet pressure of 10”w.c. and it is pre-

arranged from the factory to operate with one of these gas/pressure as indicated in the pre-arranging labels

affixed on the appliance, package and Instruction booklet.

If Natural gas is converted to Propane, also the by-pass orifice has to be changed.

The regulating screw of the by-pass orifice must be fully screwed in.

To convert the regulator (Fig.6 and Fig.7) for use with the other gas (different from the one for which it is pre-arran-

ged) it is enough perform the following operations:

1. Unscrew by hand the upper metal stopper of the regulator.

2. Unscrew by hand the white plastic piece screwed under the above mentioned metal stopper, afterward screw

it again in opposite way under the metal stopper(for gas reference see the written “Propane” and “NAT” with

relative indicating arrows on the white piece).

3. Screw again by hand the metal stopper in the original position on the regulator. Operating in this way the gas

regulator is converted for use with the other gas/pressure

Fig. 6 Pressure regulator

Fig. 7

that system.

Gas Supply Specifications

Gas

Type

Manifold

Pressure (WC) Pressure

Max. Input Min. Gas Supply

Pressure (WC)

Natural 5 6 1/2 psi

LP 10 11 1/2 psi