Owner's manual

II. Function Introduction

3. The system will detect the source and the target disc automatically.

4. After detecting, the system will start to compare.

The file compared

Total file wait

for compare

Compare process %

5. When the comparison has finished, press to go back to the previous

menu.

**Note:

The compare function is to do file by file and bit by

bit comparison. Therefore, compare speed will be affected by

file quantity, total content size and Flash device’s reading

speed.

While doing multi-session disc comparison, it is allowed only

one disc to compare with the source.

Disc Spanning Compare

1. Plug a Flash device (ex: USB, SD, MMS…) into the proper slot as source

and place a disc into burner as target for comparison.

2. Select 2. Compare

and press to start comparison.

3. The system will detect the source and the target disc automatically.

4. After detecting, the system will start to compare.