User's Guide

Chapter 4: Operations and Adjustments
RTMS Echo User Guide ©2019 Image Sensing Systems Inc. 4-48
Date and Time Setting
This function is used to set the date and time in the RTMS Echo sensor.
1. Click the Settings tab.
2. In the Date and time section, click change.
3. Is the date and time to be set automatically or manually.
4. Is the date and time to be set according to the connected computer?.
5. Select the time zone where the RTMS Echo sensor is installed.
6. If a change was made, click Save changes.
Automatically Manually
Select the Automatically set via
GPS check box.
a) De-select the Automatically
set via GPS check box.
b) Continue with the next step.
Yes No
a) Click the Use computer date
and time icon.
b) Continue with the next step.
a) Click the calendar icon.
b) Select the date and time.
c) Click Set.
d) Continue with the next step.