Wiring Guide
Specificaons
Notes
Statement
Contact Us!
LED indicator connecon status
Audio sources connecon
iMageTech M6 Wireless Speakerphone System
* This product works only with slave device iMage A6 (A7).
* To use this product successfully, the channel "S0" is required to connect to a slave device.
* Connecng audio device in video mode requires engineer to wire and set up the system in advance; in case you encountered any problem when doing so, call engineers for service. ·
* You may connect with an iMage A6 (A7) up to 20 meters apart if it is not blocked by a wall or other larger obstacles.
* Your IMage M6 can be paired with up to 6 iMage A6 (A7) devices. When pairing for the first me, it is recommended to pair the next iMage A6 (A7) only aer the last has been paired successfully.
* It takes 30-45 seconds to pair iMage M6 with iMage A6 (A7) for the first me; aer that it takes up to 10 seconds once powered on to pair each other successfully.
* Wall/ceiling mount: Equipment mass ≤ 1kg mounted ≤ 2m
This product complies with the provisions of the low-power radio wave radiaon Administrave Regulaons Arcle
XII-XIV etc.
* Without permission granted by the DGT, any company, enterprise, or user is not allowed to change frequency, enhance transming power or alter original characterisc as well as performance to an approved low power
radio-frequency devices.
* The low power radio-frequency devices shall not influence aircra security and interfere legal communicaons; If found, the user shall cease operang immediately unl no interference is achieved.
* The said legal communicaons means radio communicaons is operated in compliance with the Telecommunicaons Act.
* The low power radio-frequency devices must be suscepble with the interference from legal communicaons or ISM radio wave radiated devices.
1. Website Introducon: hp://www.iMagetech.com.tw
2. E-mail: hp://www.iMagetech.com.tw/contact.php
3. Please call: +886-2-27967041
4. Address: 5F, No.16, Ln. 15, Sec. 6, Minquan E. Rd., Neihu Dist. Taipei City 114
To determine connecon status of your iMage M6 based on the
"Connecon status indicator (white)":
* Pairing in progress: flashing quickly
* Paired successfully: lighng up
* No device connected: flashes once every 5 seconds
* Note: These are data tested in lab environment; actual ones may vary with operaon condions.
You may connect the iMage M6 Wireless Speakerphone System to desired backend audio devices in Bluetooth, USB, video and expansion mode
with the "Audio source switch key (No.1)".
* Bluetooth mode (blue light): Your iMage M6 enters the pairing mode once switched to Bluetooth mode; smartphone or tablet with Bluetooth
mode enabled then can find and pair with your iMage M6 automacally.
* USB mode: Connect your iMage M6 to PCs with USB cable and start using it.
* LINK mode: See chapter "Video host connecon guidelines" and "Wiring guidelines" for reference.
* Expansion mode: Designed to use at site of greater space by serial connecng more iMage A6(A7) with iMage M6.
Model number:
iMage_M6_01
Dimensions:
118mm X 118mm X 33mm
Weight:
445±5g
Bluetooth version:
Bluetooth V5.0+EDR/AG HFP V1.6/A2DP
Working frequency:
2402MHz~2480MHz
Module type:
Bluetooth Specificaon V5.0 Class 2
Sound I/O format:
Bluetooth/Line(3.5mm)/USB
Mixing:
6 channel analog in/out
Setup soware:
iMageTech Audio Manager
USB port:
Micro-USB
Antenna type:
Build-in Antenna
Power input:
DC5v ±5%
Operang environment:
0 ~ 50±2
℃
Devices aligned:
iMage A6 Bluetooth Conference Speakerphone
iMage A7 Lavalier Micphone
Wall/ceiling mount:
Equipment mass ≤ 1kg
Mounted ≤ 2m