User's Manual

16
To listen to tracks from a media server, ensure that Sensia is in Browse
view and carry out the following:
1. Tap Source.
2. Tap Network/USB media.
3. Wait while Sensia searches for available media servers and USB
media.
4. The list panel will display a list of the media servers that have been
found on your network and any detected USB media.
5. Tap the server that you want to connect to.
6.
Navigate to the area where the audio is located and select one to play.
You can stream music stored on your computer or on a UPnP-compatible Network Attached Storage device
to Sensia. To stream music from your computer you will need to install media server software on it. See page
14 for more information.
Streaming audio from a Media Server
To listen to tracks from a USB memory stick:
1. Tap Source.
2. Tap Network/USB media.
3.
Wait while Sensia searches for available media servers and USB media.
4. The list panel will display a list of the media servers that have been
found on your network and any detected USB media.
5. Tap the USB icon to display the contents of your USB memory stick.
6. Navigate to your tracks and tap to play.
Note: The Network/USB media source icon will turn yellow when you
initially insert a USB media device. Please wait until the icon reverts
back to blue before trying to browse any tracks on the USB media.
Sensia can be used to play music by connecting a USB memory stick to the USB port on the back of Sensia.
The audio file types that Sensia supports include WMA (Standard V9), AAC, MP3 and MP2. By default, Sensia
looks for audio on your network if you have not connected a USB memory stick to the back of Sensia.
Listening to audio from a USB memory stick
Network/USB media