User's Manual

18
Specifications
DataGuard rf UHF Automatic Label Programmer
Part Number 66-0000-9001-0
Physical Data:
Dimensions 75 x 31 x 22 cm (29.4 x 12.2 x 8.5 inches)
Weight 14 kg (31 lbs.)
Electrical Data:
Power adapter 100-240VAC 50-60HZ 1A
Programming station 12VDC 2.5A (TIP +, RING -) +12VDC ---o)--- GND
Operating frequency 902 to 928 MHz
Data Interface USB Type B Jack
Environmental Conditions:
Operating temperature 5° C to 40° C ( 40° F to + 105° F)
Storage temperature -25° C to +85° C (-10° F to +185° F)
Humidity 5%-80%, no condensation
RF Approval:
USA FCC 47 CFR Part 15.247
Canada RSS-210
USA
FCC ID: PB4DGPRG220
This device has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference
at his own expense.
Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Modifying this device may void the user’s authority to operate the device.
CANADA
IC: 6900A-DGPRG220
The term "IC:" before the equipment certification number only signifies that the Industry
Canada technical specifications were met.