User's Manual

4
I. Choose the program group you wish to include the software in and press the
Continue button on the Choose Program Group Installation dialogue box (Figure 3)
to begin the installation. When the installation is complete, click on the OK button to
exit the installation set up of the software for the DataGuard rf UHF Automatic Label
Programmer.
Introduction
The Imation DataGuard rf UHF Automatic Label Programmer allows the user to write (“Program”)
the RFID tags embedded in barcode labels before the labels are removed from their printed
sheets. The programmer has twin laser readers that pick up the barcode information as the
labels pass below the readers and converts the laser barcode information to RFID identification
data. Twin RFID antennas use those identification data to initialize the RFID tags in the labels.
The RFID antennas can also read the RFID data in order to display the label information or to
verify that the laser barcodes are identical matches with the RFID tags.
The startup screen appears below.
Figure 3