User's Manual

9
2. The belt passes the sheet of labels below the laser scanners once again in the reverse
direction, pausing at each pair of labels until they have been verified.
3. The system will put a “VER” confirmation next to each label identification number
whenever the written RFID number matches the printed barcode ID, as in the example
below. An audible confirmation is also provided.
4. If the “VER” confirmation does not appear for any label—
a. Select the "Scan/RFID Verify" radio button again. If the “VER” confirmation still
does not appear:
b. Click on “New Sheet.” The following dialogue box (Figure 9) will appear:
c. Click OK to clear the sheet fields without adding the tags to the order list.
d. Repeat the RFID write and verify process for this sheet again.
e. Click Cancel to cancel the new sheet operation. You can then try again to verify
the tags that were missed.
Figure 9